-
Anonymous users2024-01-24This is two situations: there is a problem with the parallelism between the guide rail and the spindle of the lathe itself, so that even if the size head appears when processing the cylindrical surface with a larger diameter and a shorter length, this can be added to the carriage with a dial gauge, and the spindle is added to the check rod to check and adjust the machine tool to solve;
In addition, it is usually caused by the "let the tool" situation when machining the "slender shaft", which can be solved by changing the process: adding "with the tool holder", using a thimble, reducing the amount of feed, and using a reasonable tool.
-
Anonymous users2024-01-23If you process a big head, you will dock the car at both ends
It could be that the four screws inside came out.
Carpentry CNC lathes are not ten years or eight years, and it is impossible to get a high salary, I just learned CNC control.
1.Carbon deposits can cause insufficient combustion of gasoline and cause the engine to shake. The impact of engine carbon deposition on the car is quite large, first of all, to reduce the engine power, that is, to make the power output uneven and gradually decay, in other words, more and more powerless. >>>More
There are two types of inclined bed CNC lathe tailstock available: hydraulic and manual. >>>More
Panel furniture generally learned to be about 250 a day but not so dangerous, solid wood furniture learned tens of thousands of dollars a month, but very dangerous, basically everyone who made solid wood furniture was sawed to the hand, and some were sawed off.