-
Anonymous users2024-01-23It can be bonded with glue, but porcelain white glue is not good, it is too easy to age, and the mirror will fall off after 2 years.
It is necessary to use neutral glass glue (acid glass glue is not good, the paint on the back of the mirror and the acid glass glue will cause paint to peel) If there is a condition, it is best to use neutral silicone weather-resistant structural adhesive.
-
Anonymous users2024-01-22If you are pasting flat glass, it is no problem to use a little glass glue. If it is quite thick, then I suggest that you do edging on the basis of the above, which is both beautiful and firm. If you get it right, it's going to be a work of art.
-
Anonymous users2024-01-21If there is contact between three sides and the wall, you can glue and bond, and don't think about both sides or one side.
It will leak, but you can do a repair layer at the drill hole, and you can use Longheng's flexible K11 waterproof coating, which is the most suitable for repairing various corners.
Use putty to make it the same color as the wall tiles, fill the borehole, you can hang a small painting, or a small decoration, you can block the hole.
The wires are scrapped to prevent electric shock. You can't use it anymore. >>>More
No, glass glue is only used for surface decoration, and has neither strength nor durability. If you want to use glue bricks, you can choose 933 construction glue or other special glue (marble glue).
1, look at the 110 pipes on the ceiling side of your bathroom, whether there is a water trap, if there is, you don't have to install it, 2, if not, see if there is decoration downstairs, if not, install one, if it is installed, you have to communicate, 3, the general developer will install it.