-
Anonymous users2024-01-24Make a shower room to separate the dry and wet, so that the water will not touch the door of the wash basin and cause rust and deformation when showering.
-
Anonymous users2024-01-23Try to put plastic wrap on the cabinet door.
Hope it helps.
Maybe the ground was not leveled when it was renovated, and the lowest-lying places were usually floor drains. >>>More
OK. (My previous bathroom was laid out as well).
Minimize turns in the laying of pipes to leave room for later dredging. >>>More
The determination of these spaces is generally determined by the location of the water supply and water reserved by the builder. In particular, the position of the sewer pipe cannot be changed; The water supply pipe can be changed on the wall or floor of your home.
Translucent, waterproof, if the requirements are higher, you can use sound insulation and sealing effect better.
Hello, the advice for you is 1Turn on the faucet switch on the top of the basin and rotate it to the direction of hot water; 2.In the case that the orange line of the water supply pipe is normal and the electric water heater is working normally, if there is no water flowing out of the faucet, the water inlet switch belonging to the electric water heater is not opened, and the water inlet switch can be turned on. >>>More