My family pulled broadband from the mobile side to the living room, sent a mobile router, and then u

Updated on Living room 2024-05-08
1 answers
  1. Anonymous users2024-01-23

    If the network cable is not connected, it means that the interface cannot receive the signal, and there should be a problem with this network cable.

Related questions
3 answers2024-05-08

If the network cable is not long enough, ask the mobile side to pick you up a little, no money.

3 answers2024-05-08

OK. Is your broadband wired or wireless. If it's wired, it depends on whether your network cable is long enough? >>>More

3 answers2024-05-08

Three methods, 1Pull the network cable to the place where you need to connect to the router. This method is a clear line that many people don't want to, but it's the best way. >>>More

2 answers2024-05-08

There must be an embedded living room-to-room network cable.

3 answers2024-05-08

After setting the WAN port of route b to automatically obtain the IP, you also need to set the Lan port to, otherwise the mobile phone behind router b will not be able to recognize the two routers b and a because their IP addresses conflict. After setting, some mobile phones need to reconnect to the b router because the IP address of the mobile phone will change.