The smoke exhaust pipe of the range hood is a bit long, and the shaking is tied to the tap water pip

Updated on Kitchen 2024-05-16
2 answers
  1. Anonymous users2024-01-24

    According to the regulations, flexible joints should be installed on the smoke exhaust pipes of public kitchen range hoods, or flexible sleeves should be added. The range hood at your home has a small power, the vibration will not be very large, and there are fixed pipe clamps on the water pipes, which should be fine.

  2. Anonymous users2024-01-23

    It doesn't matter much...

Related questions
The hood exhaust pipe is a bit long, and it is tied to the tap water pipe on the top of the kitchen
4 answers2024-05-16

It is recommended to use the level and nail it to the wall. If you tie it to a water pipe, there will be noise when you work...

The smoke exhaust pipe of the range hood is a bit long, and if there is vibration during work, it ca
2 answers2024-05-16

Tap water is no problem.

Pay attention to the difference between gas pipes! >>>More

How big is the pvc pipe used for the kitchen range hood exhaust pipe
1 answers2024-05-16

Please choose a professional master to check at the door, it is generally not recommended to use PVC for smoke exhaust pipes

Where should the smoke exhaust pipe of the kitchen range hood be placed
4 answers2024-05-16

Smoke exhaust pipes are generally 15 cm and 18 cm in diameter, but now the popular ones in the market are 15 cm. It is very convenient to leave the hole small and then expand, and it is not difficult to change it to small if it is left large, but it is easy to return to the smell if the seal is not good. As long as the kitchen roof is not hoisted, it can be changed later. >>>More

The exhaust pipe of my kitchen hood passes through the base cabinet, and the moisture in the base ca
1 answers2024-05-16

This may be the place where there is a leak in the smoke exhaust pipe of the range hood, and the smoke discharged from the range hood will also discharge humid vapor.