-
Anonymous users2024-01-241. The wooden board should not only be fixed on the calcium silicate board, but should be buckled on the top of the light steel keel, that is, at least two sides are placed on the light steel keel. Otherwise, it is not safe to fix the ceiling lamp directly, after all, the ceiling lamp weighs more than 20 pounds. 2. Scrape putty first, brush latex paint, and then install ceiling lamps at the end.
3. When installing the ceiling lamp, it will generally not affect the seams. 4. The gypsum line should be installed before the putty, as long as it is pasted on, and it is not fixed with nails. Of course, it is better to fix with nails.
It is possible to install plaster lines on wooden boards.
-
Anonymous users2024-01-23It is determined according to the height of the floor and the size of the ceiling.
It must be a good decoration in the room, and the sleeping place is more important.
According to your own needs, it is generally about 40-50 cm.
30 square meters of living room, do not use the main light, only install downlights, generally how far a downlight lighting capacity can cover how much area depends on how much power you choose, the general family does not need to be too dense, at least one meter five or so to install a 13W....
After the ceiling, there is generally no need to do gypsum corners. The minimalist style is even less needed. Shifu asked you to do the gypsum line mainly for the painter to approve the wall to make the paint for better construction, if the yin angle line is uneven, you can use the gypsum line to cover it.
It seems that you don't need a suspended ceiling to walk around.