If I want to open a panel furniture factory, what equipment do I need to buy? How much does it cost

I am doing panel furniture production line, first of all, panel furniture is divided into cabinets, door panels, these two can depend on their own situation, not much money to do only one kind of rest can be outsourced, can also be done.

The cabinet is mainly used for cutting, punching three-in-one holes, edge sealing, and assembly. The old version of the home has a sliding table saw cutting, row drill punching, edge banding machine edge banding. In the new version, use the cutting machine to directly cut the material and punch the front hole; After the edge banding machine is used to seal the edge, the side hole punching machine punches the side hole and wooden pin hole of the three-in-one hole.

In general, a cutting machine, an edge banding machine, and a side hole machine are required. In this way, the cutting machine has just started, and it is good to use the standard of four processes, about 6-70,000 for standard models, 50,000 for fully automatic edge banding machines, 10,000 for semi-automatic products, and 10,000 for Lazen chain side hole machines. So it's up to you.

In this way, the words of the reincarnation of the grandson are 14-170,000 like this.

The door panel is relatively simple, mainly for modeling, cutting and polishing, laminating, and hinge holes. Generally, the cutting machine is used for modeling and cutting. At present, the cutting machine can also be cut, as long as the board is not too bad and not linting, the polishing step can be omitted, directly laminated, and then the hinge hole is hit with a hinge machine.

Some door panels need to be printed with a UV color printing machine. In general, you need a cutting machine, a laminating machine, a UV color printing machine (not a must), a polishing machine (a cheap manual one, and a general good plate is not needed), and a hinge machine. In the case of a cutting machine, it is 6-70,000 yuan with a cutting machine of the cabinet, and there are more than 3 in the case of a laminating machine.

So more than 100,000.

Just do cabinet copying.

Words cutting machine.

Raid + edge banding machine + drilling machine.

1. The price of the double spindle plus 9V drill bag is very conventional at this price, and the dao can also be obtained in the cheap one like the four-process W, and the output is definitely not as high as the above one (about 120 boards under the double spindle + drill bag above). 2. There is nothing to say about the edge banding machine Gluing + front and rear head + rough trimming + fine trimming + tracking trimming + scraping edge + polishing This several functions are about 14W You can also add some like: pre-milling double glue pot slotting double storage belt mechanism, etc. This is calculated separately (about 200m a day).

3. Drilling no money directly on the side hole with PC control, photoelectric and scanning tags are also available in the cheap ones. If you have money to drill on CNC drills, you can drive about 250m a day on 5 sides, and the price is relatively expensive, about 25W and 30W. Roughly these three main ones.

In total, 30W and 50W can be done, of course, there are cheap ones, and we also sell them, and there are expensive ones. Whether the equipment is expensive or cheap depends on your requirements for process and output.

To make a blister door panel, it is nothing more than a cutting machine, a sanding machine, positive and negative pressure, and a hinge drill.

If you are interested, you can chat with me privately.

I am doing the BAI production line of panel furniture, first of all, there are two kinds of DAO for panel furniture cabinet and door panel

These two can be done depending on their own situation, and they are only done with little money.

The rest of the genus can be outsourced or both.

The cabinet is mainly used for cutting, punching three-in-one holes, edge sealing, and assembly. The old version of the home has a sliding table saw cutting, row drill punching, edge banding machine edge banding. In the new version, use the cutting machine to directly cut the material and punch the front hole; After the edge banding machine is used for automatic edge banding, the side hole machine makes the side hole and wooden pin hole of the three-in-one hole.

In general, a cutting machine, an edge banding machine, and a side hole machine are required. In this way, the cutting machine has just started, and it is good to use the standard of four processes, about 6-70,000 for standard models, 50,000 for fully automatic edge banding machines, 10,000 for semi-automatic machines, and 10,000 for side hole machines. So it's up to you.

In this case, 14-170,000 like this.

The door panel is relatively simple, mainly for modeling, cutting and polishing, laminating, and hinge holes. Generally, the cutting machine is used for modeling and cutting. At present, the cutting machine can also be cut, as long as the board is not too bad and not linting, the polishing step can be omitted, directly laminated, and then the hinge hole is hit with a hinge machine.

Some door panels need to be printed with a UV color printing machine. In general, you need a cutting machine, a laminating machine, a UV color printing machine (not a must), a polishing machine (a cheap manual one, and a general good plate is not needed), and a hinge machine. In the case of a cutting machine, it is 6-70,000 yuan with a cutting machine of the cabinet, and there are more than 3 in the case of a laminating machine.

So more than 100,000.

First of all, the plates.

Bai style furniture is divided into cabinets, door panels, two kinds, these two can depend on their own situation, funds do not do more than one kind of back to the rest can be outsourced, can also be answered.

The cabinet is mainly used for cutting, punching three-in-one holes, edge sealing, and assembly. The old version of the home has a sliding table saw cutting, row drill punching, edge banding machine edge banding. In the new version, use the cutting machine to directly cut the material and punch the front hole; After the edge banding machine is used for automatic edge banding, the side hole machine makes the side hole and wooden pin hole of the three-in-one hole.

In general, a cutting machine, an edge banding machine, and a side hole machine are required. In this way, the cutting machine has just started, and it is good to use the standard of four processes, about 6-70,000 for standard models, 50,000 for fully automatic edge banding machines, 10,000 for semi-automatic machines, and 10,000 for side hole machines. So it's up to you.

In this case, 14-170,000 like this.

The door panel is relatively simple, mainly for modeling, cutting and polishing, laminating, and hinge holes. Generally, the cutting machine is used for modeling and cutting. At present, the cutting machine can also be cut, as long as the board is not too bad and not linting, the polishing step can be omitted, directly laminated, and then the hinge hole is hit with a hinge machine.

Some door panels need to be printed with a UV color printing machine. In general, you need a cutting machine, a laminating machine, a UV color printing machine (not a must), a polishing machine (a cheap manual one, and a general good plate is not needed), and a hinge machine. In the case of a cutting machine, it is 6-70,000 yuan with a cutting machine of the cabinet, and there are more than 3 in the case of a laminating machine.

So more than 100,000.

I also make machines, so I can talk about it if necessary.

I do panel custom furniture, and I understand all aspects that I want to open my own factory now because I lack funds. Where are you? Communicate more!

The equipment required for panel furniture has four processes.

Feed machine, side hole machine, edge banding machine, hinge hinge drill plate, sliding table saw is used to make up for a single plate right, large and small should be at least 170,000 in a small 200,000.

Please click to enter a picture description for the side hole machine.

Please click to enter a description of the four-process cutting machine.

Please click to enter an image to describe the edge banding machine.