-
Anonymous users2024-01-23In the case that it is determined that the nut that is not in contact with the water supply pipe and the toilet bowl is not loose, it may be that the sealing gasket was not padded when the toilet was installed, or the sealing gasket is broken, use a blade to separate the glass glue under the toilet bowl, and then check or replace the lower sealing ring.
-
Anonymous users2024-01-22Where there is a leak, put some glass glue. Hit when you want to dry.
-
Anonymous users2024-01-21It's time to change the parts inside.
This is a very simple little problem You won't get the master of the store that sells sanitary ware to help you get it It is best to do this method yourself as much as possible Don't try it yourself A designer's answer I hope it can help you Thank you!
The sound may be strengthened or distorted by the pipes, or it may be that the pipes are not well drained and have a tendency to back-inject.
There is silt in the pipes, the water flow is not smooth, and it is good to open it.
Closing the toilet lid before flushing can prevent feces from spilling with bacterial droplets that pollute the air and the restroom, but clean the inside of the toilet seat frequently.
The water output is controlled by the middle one, you can use the big key to try the water output first, and then try the small key, if the installation is reversed at that time you just turn the button on the lid off the head, please adopt it.