Can you take a shower in the bathroom after sticking glass glue under the toilet?

Updated on Toilet 2024-05-21
8 answers
  1. Anonymous users2024-01-24

    You can take a bath in the bathroom after sticking glass glue under the toilet, but you need to glue the glass glue for 6 hours before entering.

    The curing time of glass glue increases with the thickness of the bond, for example, 12mm thick acid glass glue, it may take 3-4 days to set, but in about 24 hours, 3mm of the outer layer has cured. When bonded to glass, metal, or most wood, it has 20 lb-inches of peel strength after 72 hours at room temperature.

    If the area where the glass glue is used is partially or completely sealed, the curing time is determined by the tightness of the seal. In an absolutely confined place, it is possible to remain uncured forever. If the temperature is increased, the glass glue will soften.

    The gap between the metal-to-metal bonding surface should not exceed 25mm. In various bonding occasions, including closed conditions, the bonding effect should be thoroughly checked before the use of the bonded equipment.

  2. Anonymous users2024-01-23

    If it is a structural adhesive, it will take about 12 hours (at room temperature), if it is a sealant, about 2 to 3 hours (at room temperature), touch the surface of the glue with your hands, no sticking to your hands, no depression, and hardness elasticity.

    The quality of glass glue can be examined from viscosity, tensile force, whether it is mildew-proof, whether it is easy to clean, whether it will change color, etc., from the color point of view, glass glue has a variety of colors, white, black, color, etc., as well as transparent colors. Acid silicone glass adhesive: has a wide range of bonding and excellent adhesion to most building materials such as glass, aluminum, oil-free wood, etc.

    However, it cannot be used to bond ceramics, marble, etc. Neutral silicone glass glue: can be used to bond ceramic sanitary ware, marble, etc.

    There are many varieties of glass glue on the market, including acid glass glue, neutral weather-resistant glue, silicic acid neutral structural glue, silicone stone glue, neutral anti-mildew glue, insulating glass glue, special glue for aluminum-plastic panels, special glue for aquarium, special glue for large glass, special glue for bathroom mildew, acid structural glue and so on.

  3. Anonymous users2024-01-22

    Yes, the glass glue is waterproof, and taking a bath will not have an impact on the glass glue, as long as it is not moved before the glass glue dries, there will be no problem after the glass glue dries.

  4. Anonymous users2024-01-21

    Glass glue should be exposed to water for at least two hours after use. It does not affect water resistance.

  5. Anonymous users2024-01-20

    Yes, the setting time of glass glue is 12 hours, and some good times will be faster. You can use it with confidence.

  6. Anonymous users2024-01-19

    After the bottom of the toilet is glued with glass glue, it is possible to take a bath in the bathroom, but it needs to be solidified in this glass glue for 24 hours, and within 24 hours, if you take a bath, it is likely to cause the glass glue to be unreliable.

  7. Anonymous users2024-01-18

    Can children take a bath in the bathroom after sticking glass glue? This problem is to wait for the glass glue to dry is to be able to take a bath in the bathroom, and the taste is not allowed.

  8. Anonymous users2024-01-17

    Yes, before installation, put enough glue on the bottom, then put the toilet well, and then glue around it, as long as the seal is good, there is no problem in taking a bath in the bathroom.

Related questions
1 answers2024-05-21

It is best to use it after 24 hours of drying.

Extended Materials. 1. Glass glue is a commonly used adhesive in the family, which is composed of sodium silicate, acetic acid and organic silicone. Sodium silicate is soluble in water and viscous, and is called water glass in the south and bubble alkali in the north. >>>More

3 answers2024-05-21

Because the surface of the ceramic sanitary ware is covered with a dense glaze, the affinity between the acid silicone glass glue and the glaze is extremely poor, so it cannot be used.

4 answers2024-05-21

If it is a structural adhesive, it will take about 12 hours (at room temperature) If it is a sealant, about 2 to 3 hours (at room temperature) touch the surface of the glue with your hands, no sticky, no depression, and the elasticity of hardness can be, your should be sealant, check and see, I hope it can help you.

3 answers2024-05-21

No, glass glue is only used for surface decoration, and has neither strength nor durability. If you want to use glue bricks, you can choose 933 construction glue or other special glue (marble glue).

4 answers2024-05-21

The strength of the glass glue is not enough to support a person's long-term weight Oh, if you are at the convenience of the time, it cracks, what do you want to look like the consequences, it is recommended to give priority to replacing it as well!