-
Anonymous users2024-01-24Question: My toilet has been changed, from the toilet to the urinalHow long the meter is, will the toilet be blocked after installing the toilet, and the dirt will not be clean.
Nowadays, the toilet is directly installed on the squat, can it be used to make the field?
Answer: Yes, but you must first knock out all the protruding places on the surface of the squatting toilet, and the pipe of the drain should also be raised a little higher with a drainage pipe, and then fill the empty space in the squatting toilet with cement, and then buy a suitable toilet according to the distance of the hole. Pay attention to the seal when installing to avoid leakage.
After the question is changed, it flows horizontally to the mouth of the toilet more than a meter away, that is, it was originally blocked, and the merchant came to see him when he installed the toilet and said that he could, and he explained to me that the road chief is the same as the chimney length, and the suction power will never be blocked, is this so, please inform.
When he asked the question, he did not fill in the original inlay space, but put the seal on it, I installed the original urinal tank, and then I put the toilet tank water and then flushed it with the original water tank, and now it looks like it can be.
Thank you for your answer, I'm very satisfied, thank you!
Well, the toilet seat is very easy to install, just buckle it up, it depends on what you buy now? Is it the old version?
A flush toilet consists of the following main parts: inlet pipe, outlet pipe, seepage pipe, plug (inlet and outlet), float, drain knob and lever. Be sure to understand the role of each of the above components in the work. >>>More
Flush toilets are more common in life, and barrier-free toilets in families and public toilets are inseparable from flush toilets, which are very convenient to use, and this convenience is all brought by flush toilet tanks. >>>More
Many people may not understand that the wrong opening of the kitchen flue will also lead to the smell of the kitchen. Although if it is not done well, we find out, then it is good to correct it back when the smoke pipe is being constructed, but this is not an increase in workload, and it is also time-consuming, so I wish everyone can make a better flue mouth, so as to bring us a comfortable life experience. >>>More
Solid wood composite door is the introduction of German technology and technology production, the process has been quite mature. The solid wood composite door is a three-layer composite structure, the core skeleton (substrate) of the door is 30MM laminated timber (the general material is pine or fir, because of its small density, light weight, and easy control of moisture content), the door core skeleton is a solid wood grid or MDF grid, and 5MM MDF is pasted on both sides (MDF has extremely high stability and flatness, which cannot be replaced by other materials, and at the same time plays a role in changing the stress of the substrate to prevent deformation), and the surface is pasted with high-grade solid wood veneer (such as black walnut, red cherry, pear, teak, Sapele and so on, because of the solid wood veneer pasted can also achieve the effect of solid wood doors even better than solid wood doors, such as straight grain or mountain grain parquet). The paint surface is generally polyester paint, as long as the process and equipment are in place, there will be no paint cracking and veneer bubbles, and the solid wood composite door plays a role in reducing the internal stress of the wood in all aspects of the process and materials, so the probability of deformation has been reduced to a minimum.