-
Anonymous users2024-01-24It is normal for the toilet hole to be 300mm or 400mm apart. In actual operation, 20mm is reserved, and 20mm is the distance of the reserved wall tiles. According to the area of the bathroom cherry cover Hui to decide, the bathroom area of each home decoration is different, so the location of the toilet is also different, and the pit distance needs to be determined according to the bathroom design to determine the size of the ridge.
Generally, 20mm is reserved, and 20mm is the distance between the reserved wall tiles, so the actual distance from the center line of the toilet drain to the wall is 320mm or 420mm, and the actual error of 10mm is normal, and the premise is that it can be installed normally.
When measuring the distance of the toilet pit, you can draw a horizontal line of 800mm from the ground in the middle of the toilet back, and bury it at the cathode to make a hole with a diameter of 30mm and a depth of 70mm. Then insert the bolt with a diameter of 10mm long and 100mm into the hole, screw the cement firmly, hang the water tank on the bolt, put it flat and align, align it with the center of the toilet, pad the rubber pad, screw on the nut, and tighten it appropriately.
-
Anonymous users2024-01-23Toilet pit spacing refers to the distance between the center of the toilet drain pipe and the wall, which is the positioning size of the toilet drain (toilet drain). The toilet pit distance was originally 300mm, 350mm, 400mm, 450mm and some other uncommon specifications, and later with the gradual unification of standards, now the most common is only 300mm and 400mm two specifications of toilets.
According to the type of toilet room and personal preference, the toilet pit distance is the positioning size of the toilet drain (toilet drain). It is normal to choose a toilet with a pit distance of 300mm or 400mm.
In actual operation, 20mm is reserved, and 20mm is the distance of the reserved wall tiles. Then the actual distance from the center line of the toilet drain (diameter 110) to the wall is 320mm or 420mm. The actual error of 10mm is normal, and the premise can be installed normally.
-
Anonymous users2024-01-22Measurement of the hole spacing of the toilet: the actual distance from the center line of the toilet outlet to the wall, and the actual error is normal within plus or minus 10mm.
It should be noted that the thickness of the tiles should be considered when measuring, and when we finish measuring, it is recommended to go upstairs and downstairs to ask the neighbors, and in general, the hole spacing of the toilet bowl of the same unit and the same type is also the same. The old toilet must be removed and measured again to ensure that the data can be accurate.
-
Anonymous users2024-01-21Toilet hole spacing refers to the distance from the wall to the center of the drain after you have tiled it. At present, the standard hole spacing of toilets provided by most domestic manufacturers is: 300 and 400mm.
The 305mm hole spacing is actually 300 holes, and the size and diameter of the sewage hole is generally 38-50 mm.
-
Anonymous users2024-01-20ç¹20mm×óÓ
Toilets, officially known as toilets, are buckets with lids for urinating and urinating. The invention of the toilet is known as a great invention, which solved the problem of people eating and drinking in and out of Lazar. Later, it evolved into a flush toilet using the principles of siphon, spiral siphon, and now the latest jet siphon and superspin siphon. >>>More
Generally, it is 38 40CM from the wall, which is a standard size, and the installed toilet measurement generally measures the position of the toilet fixing hole is the position of the drain.
MOST OF THEM ARE 30CM, AND A FEW ARE 20CM APART.
The impact of the front and back holes is about the same, just see which one fits.
can be installed; But after installation, the toilet tank is 8-10 cm away from the wall. It must be at least 5-6 cm. This makes it look ugly and unconvincing. >>>More