-
Yours is definitely not the furniture of a large company, the protective film is also paper, the best way is to blow the hair dryer, it is much better after blowing hot, and then use a cloth dipped in thinner, gently wipe it, and start to pull after seeing the corners.
-
There is a more practical method, which we will use in the unit, you can use a hair dryer to bake it slightly, but don't overdo it... It can be easily wiped off with a soft cloth.
-
Use an eraser to wipe off the edges or corners of the protective film, and it's easy to wipe the film up, and then tear it off with your hands!
-
Generally, it is removed by washing with water, and the specific method can be like this.
Wipe the furniture with warm water, then tear it in half with a damp towel along the edges and squeeze the water into it, so that the tear will be more beautiful.
If it is a metal product, then you can use a fire to bake it a little before tearing, so that it will not stick very tightly.
-
Agree with what was said upstairs, the landlord bought not brand furniture, use a hair dryer to blow hot edges, tear one side, and then blow while tearing, leaving no traces.
-
Tips for removing the protective film of the new bed:
1. Use a warm towel to wet a place first, and then wipe it with a towel, little by little.
2. Use a hair dryer to blow hot air on the sticker, it takes about 3-5 minutes, slowly tear off the label after the glue is hot, and continue to blow it with a hair dryer if it is not completely torn off. This dilemma can be solved without affecting the furniture.
-
Gently peel off at the corners of the protective film and lift it along the edge to the middle.
-
A few drops of wind oil essence and carminative oil are brushed off to ensure that no glue stains are left.
-
The best way is to blow a hair dryer, which is much better after blowing, and then use a cloth dipped in thinner, gently wipe it, and start to pull it after seeing that there are corners.
-
n1=n1+1 right front else
Use a utility knife to gently scratch the aluminum strip, and then tear off the protective film, so that it is easy and thorough. >>>More
You can find a place that is already a little up, and apply some wind oil essence (or other oily liquid objects) to the place where it is connected to the door, peel it a little more, and then peel it again, and so on several times, and then it will get better and better to peel, be patient! >>>More
If it is not good to tear, you can use a hair dryer to heat the side of the file to blow and tear!
What exactly is the protective film you are talking about? How big is it? Is it self-adhesive or plastic film? Self-adhesive cleaning agent for self-adhesives. Plastic film rubbed with toothpaste.
How do I remove the protective film from furniture? :Hello! Glad for your question. >>>More