-
Anonymous users2024-01-23The reason is that your own bathroom is too humid. Is it that your bathroom is basically wet, and when you take a bath, the water is splashed everywhere.
This should be the bathroom embedded pipe leakage position or wall brick cracks, bathing everywhere into the water, leaking to the ground, waterproof is relatively intact and does not leak downstairs, the floor bricks have water for a long time, the wall will be dry will adsorb the water, the current phenomenon will appear after a long time, first find the cause of the leakage water after repairing the wall will slowly dry, you can not be sure to find the property department to check as appropriate.
If it is a decoration, the wire box is 86 boxes, you can open a little bigger than the box, if it is too small, it is not easy to fix.
1. Do ground waterproofing first: the bathroom should be leveled first, if you want to replace the bathroom floor tiles, you need to chisel the original tiles, use cement mortar for ground leveling, and then do waterproof treatment to avoid leakage caused by uneven thickness of waterproof coating. >>>More
Or use this or close materials, the bathroom should be simple and not complicated, and it is recommended that the waistline should not be used as much as possible.
THE DISTANCE BETWEEN THE TOILET DRAIN AND THE BACK WALL IS 32CM OR 42CM. Because the center distance of the large toilet is generally 30CM or 40CM, the back of the toilet is seamed after installation, and it will not be installed or difficult to install if it is small. There is a limit to its distance. >>>More