-
Anonymous users2024-01-231.Kaede.
When we hear the Canadian maple, we mean the Canadian maple, which should be the European white maple to be exact. The origin of birch is very wide, Southeast Asia, and northern China, and the name on the market is a bit messy, such as:"Cherry wood""Southwest Birch"Actually, it's birch.
European white maple is characterized by delicate material, white color, and elegant. The texture is less pronounced, unobtrusive, and there are few mineral lines. The color difference is also small.
The color of birch is yellow-brown, or yellowish-white, and the material is more delicate, but there are more mineral lines.
It's hard to discern them as a consumer.
2.Oak. Oak and Chinese oak belong to the same subject, and the English name is oak
The oak is a light yellow-brown color, and the pattern is obviously bold and elegant. The density is moderate and the stability is high.
Due to the different natural conditions of the region, oak and oak belong to the same genus, but they are quite different. It is lower than European oak in quality and price. It is already difficult to distinguish between oak and oak in the market.
If I had to choose between oak and maple, I would prefer oak or oak.
3.Thickness of the table.
EACH LAYER OF PARQUET IS MADE OF NATURAL WOOD, AND BY 2MM YOU MEAN THE THICKNESS OF THE BOARD.
The thickness of the parquet surface plate produced for the domestic market is mostly in. That's one-half of a millimeter. THE THICKNESS OF THE SURFACE PANEL OF THE PARQUET PROCESSED FOR EXPORT IS BASICALLY 3MM-6MM. The difference between the two is 5-10 times.
From a certain point of view, the thickness of the surface plate determines the service life of the floor. After a few years, the floor will inevitably be worn, and the thickness of the surface plate is more than 2MM, which can be disassembled and reprocessed, and the surface plate will not have this opportunity, because the original old paint will be sanded off with a sanding machine, and the surface plate will be sanded off when it is walked on the sander.
IT IS RECOMMENDED THAT YOU CHOOSE A 2MM WATCH BOARD.
It is recommended that you consider the relatively cost-effective, solid wood flooring, and remind you that the so-called top ten brands of composite flooring flooring have not been selected as early as 09 years. The latter is only the merchant's own comparison. In addition, you must also consider environmental protection when buying flooring
The parquet market is slowly getting better, the price is lower than that of solid wood, and it is also solid wood, the price will be higher than that of the composite floor, but it is much higher than the grade of the composite floor, the stability of the parquet is quite good, and the cost performance is relatively high, thank you.
Solid wood flooring and solid wood parquet are solid wood floors, but the production process of the substrate itself is different, solid wood flooring is a whole piece of wood, and multi-layer solid wood flooring is a layer of wood chips, criss-cross and stacked into a certain thickness of wood floor. >>>More
Comprehensively compare the advantages and disadvantages of solid wood flooring and laminate flooring, choose the most suitable wood floor for your home, and the little brother who has renovated 20 houses will take you to avoid the decoration pit!
Wood is a natural source and does not contain formaldehyde. However, a lot of glue and paint will be used in the production process, which will produce formaldehyde. >>>More