-
Anonymous users2024-01-24Yes, you can open a large drink bottle full of water, so that you can save a large bottle of water every time, and the bottle will have a certain buoyancy and will not block the flow of water. Hope it helps.
-
Anonymous users2024-01-23If the capacity of the toilet tank is reduced, it will save water on the surface, but it will have the consequence of not flushing cleanly.
-
Anonymous users2024-01-22It is enough to reduce the sewer pipe, but it has to be tested, and it is useless if the stamping is not enough.
Here's a trick: find a drink bottle, preferably a medium-sized Coke or Sprite bottle, fill it with water and screw it on the lid and put it inside, you can save a bottle of water every time, you should understand the principle!
Take a bottle of mineral water, fill it with water, and put it in the tank.
How to quickly unclog the toilet when it is blocked; Toilet blockage is generally a blockage at the toilet trap, and the best and easiest way is... >>>More
This is the toilet inlet pipe, that is, the water inlet filter installed in the toilet is blocked by sediment, you can turn off the toilet water inlet switch, some have a filter at the water inlet pipe, mostly in the toilet, remove the water inlet pipe connected with the toilet, remove the water inlet valve, there is a filter at the bottom of the water inlet valve, there is a strainer at the bottom of the water inlet valve, there is dirt and sediment in it, rinse it in the clean water, and then install it back, tighten the screws, install the water inlet pipe, and then turn on the switch to see that everything will be normal on the water.
This is the last time you pressed the water for too long, resulting in the plug not reset, you can press it again, just hear the snap sound to reset.