-
Anonymous users2024-01-24Problems with the landlord's furniture may be due to:
1. The quality of the plate is not good. One of them may be that the miscellaneous wood inside the board is not tightly assembled, and the gap between the wooden strips is too large, which is one of the reasons for the hollowing of some places on the tabletop; Second, the internal miscellaneous wood of the board is not dry enough, or the gluing pressing time and pressure are insufficient, which is one of the reasons for the cracking of the sandwich surface of the sandwich panel.
2. There is also a possibility of cracking of furniture sandwich panel plywood that the edge sealing is not done well in the production process (generally using thin wood or veneer edge sealing), resulting in the shrinkage rate change and cracking after painting.
3. If the substrate, paint, and production process are very good, it is difficult for the furniture to have problems in a short period of time, after all, the owner's furniture is used for a short time, and there is no very large change in air temperature and humidity, so I think the main problem is still in the furniture itself.
-
Anonymous users2024-01-23Just because it is a new piece of furniture, it is the most likely to crack, because the moisture content of the wood and the environment is not immediately unified, in general, the new home can be stabilized after the four seasons of spring, summer, autumn and winter, and there will be no major changes in the future.
The water resistance of glass glue is not good. It is possible that it will be poured by rain when it is not dry, of course, the possibility of glue quality problems is also very large, it is recommended to squeeze out a little and put it indoors to see the curing situation. >>>More
Yes, you can decorate the top surface of the wall with Chinese-style elements. The furniture can be deep or shallow
Generally, elm furniture has a cracking period, generally in winter the home will be heated, the indoor humidity will be reduced, the moisture of the old elm furniture is evaporated, resulting in the cracking of the old elm furniture, generally after the cracking period, repair can be, after which there will be very few such cracking problems!
This should be a problem with the protective film, which generally has crystal points and snowflake spots when it leaves the factory, and it is pasted on the surface of the object, and there will be a mark after it is torn off. It is recommended to negotiate with a furniture company, if you can't wipe it off, it is a furniture problem.
It is best not to dismantle, the furniture has been deformed for a long time, some of the wood will be deformed, can be dismantled but can not be pressed, and when making furniture, the carpenter will brush white latex on the connecting tenon, so that the connection is more powerful, but the tenon will be destroyed when dismantling, and it is difficult to install and not solid.