-
Anonymous users2024-01-23Hello: If the problem is overflowing water because the float inside the tank is switched ring.
-
Anonymous users2024-01-22Is the leak an overflow?
If so, then check the drain and clean up if there is dirt.
The situation you mentioned is obviously caused by the slow discharge of water from the sewer.
-
Anonymous users2024-01-211. The pumping tank has been filled with water, but the water is still continuously poured up until it overflows.
In this case, you can try to do a test check first: lift the water drift up with your hands to see if there is still water, if not, it means that the position of the water drift is not suitable.
At this point, it is enough to lower the water drift position, which can increase the buoyancy to close the inlet valve port. If there is still water inlet after lifting the water bleaching, it is very likely that there is a problem with the components of the automatic water inlet valve, and you need to ask the water master to check and repair it.
2. The toilet tank overflows from the side, just like putting the cup crookedly, and a trickle flows out of the water tank.
The toilet bowl is constantly filled with water and overflows to the side, which generally means that there is a problem with the inlet valve, and the quality of the inlet valve is considered first, and then it is not ruled out that it is caused by improper installation.
There are three scenarios for a leaky toilet:
1. The water leakage at the water inlet of the water tank, the water leaks to the toilet, the solution is to remove it to see if the rubber pad has been damaged, if no harm is found, you can try to change the direction of the rubber pad to install it. If it doesn't work, then you can only replace the rubber pad; >>>More
There are 3 scenarios;
The import and export are loose and tight. >>>More
Check to see if the water flows down from the back of the water tank, or it leaks when flushing, and the leakage when flushing is that the sealing gasket of the connection between the water tank and the toilet is loose or displaced, close the valve and drain the water in the tank, adjust the through pin screw to adjust the balance of the water tank in a fixed position, if the water flow is from the top of the water tank, that is, the water valve in the water tank is faulty, (the overflow nozzle is too high), the valve does not stop the water or the water is too large, the momentum is large, splashed out, If you can't repair it yourself, you can find the property department to repair it.
In fact, as long as you find the cause of the toilet leakage and repair the toilet leakage, you can solve this problem. So what should we do when we encounter a toilet leak, what are the methods for toilet leakage repair, and the following Tianjin Capital Decoration will learn the causes of toilet leakage and how to deal with it. >>>More
1. The material texture is poor. This reason is completely the manufacturer's cheating, and when this kind of problem is found, he directly asks the manufacturer to claim for replacement or complain to the 315 Association. >>>More