-
Anonymous users2024-01-23Rotate clockwise first and then counterclockwise.
The factory code is behind the doorknob, and if you forget the code, turn the switch.
There is a point A where you can move the bolt slightly, and then rotate the switch, turn clockwise to 12 and then counterclockwise back to A, see if you can open, start from 12, 11, 10 and try up to 12 times at a time.
The lockguards are actually two iron covers.
In fact, the lock guard does not have any anti-theft effect, its role is to protect the lock cylinder. Secondly, the starting point is beautiful.
To install the lock guard, you must first remove the door handle, remember to wear the screw from the inside to the outside when installing the lock guard, and the screw must not be twisted too tightly, twist too tightly will not use the key.
-
Anonymous users2024-01-22It's as simple as rotating clockwise and then counterclockwise. If you forget the password, just rotate the switch, there is a point A that can move the bolt slightly, and then rotate the switch, rotate clockwise to 12 and then counterclockwise back to A, see if you can open, start from 12, 11, 10 and try up to 12 times at a time.
-
Anonymous users2024-01-21This is not a professional answer, just experience, I have bought a lock guard myself, give you some experience, I hope to help you, first of all, when you buy a trivial one, there will be a red line sign on the lock or the lock seller will give you a password, for example: 10-3, after installing the lock, screw clockwise to the position of 10, and screw it to the position of 3 counterclockwise to open, but there are too many types of lock guards, I don't know what kind of lock guards yours, I am talking about the most old-fashioned lock guard.
-
Anonymous users2024-01-20Rotate clockwise first and then counterclockwise.
There is a point A where you can move the bolt slightly, and then rotate the switch, turn clockwise to 12 and then counterclockwise back to A, see if you can open, start from 12, 11, 10 at a time, try up to 12 times.
-
Anonymous users2024-01-19The lock guard generally has a cover, unscrew, and then look at the groove on the ring or something, you can use the cone to rotate it, it should be fine, I hope it will be useful to you.
-
Anonymous users2024-01-18Generally, the anti-theft door lock will tell you the password when it is installed, such as is.
1. Turn 4 to the left and 9 to the right Yours should turn right from the starting point to 11, and turn 3 from 11 to 3 to go back.
-
Anonymous users2024-01-17Rotate clockwise first and then counterclockwise.
-
Anonymous users2024-01-16It should be clockwise and then counterclockwise.
-
Anonymous users2024-01-15Break the handle upwards or turn the key to the left.
-
Anonymous users2024-01-14Rotate clockwise and set your own password.
-
Anonymous users2024-01-13nbnhn b bbb bnbvghfghg
-
Anonymous users2024-01-12Clockwise, but pay attention to maintenance.
-
Anonymous users2024-01-11Rotate clockwise first and then counterclockwise.
If you forget the password, rotate the switch, there is a point A that can move the lock bolt slightly, and then rotate the switch like a switch, rotate to 12 and then counterclockwise back to A, see if Lu Qi can open, try up to 12 times from 12, 11, 10 at a time.
Hello, I have seen your inquiry, please wait for a moment and answer it for you immediately. >>>More
You can directly disassemble the handle, just use the next two screws, after dismantling it is still used to open the lock guard method, first turn right, then turn left, and then turn in the process, to make the gap of the two small turntables against the small lock bolt on the lock guard, the important thing is to do the right turn number and the left turn number, to remember, very simple, adjusted, remember, do not look at the back, just look at the side of the lock device, with the number you find out first try again, if you can, just install it back on OK.
There is no key inserted on the lock cylinder inside and outside, right? If not, it may be a problem with the lock body or cylinder.
The nature of the security door is different! The way of setting is also different, and the regular one should generally not be opened. But it's certainly simpler than opening it outside.
With specialized tools, you can see it, and the visual effect is like looking out from the inside.