How to brush the waterproof kitchen for home improvement?

For kitchen waterproofing, generally we will directly recommend the use of mortar waterproofing agent, which is not only firm with the base surface, but also has high puncture resistance and high puncture strength, which can have the same life as the building, simple and cost-effective construction, and is now the preferred material for home decoration waterproofing.

The specific construction method is as follows:

1.Clean the construction base surface and sprinkle water to moisten, but there should be no stagnant water.

2.The waterproofing agent and cement are stirred into plain mortar according to the ratio of 1:3, and the construction site is evenly and densely painted, with a thickness of about 2 mm.

3.After waiting for 20 minutes for the plain mortar to dry, the waterproofing agent, cement, and sand are stirred into mortar according to the ratio of 1:2:6, and the construction can be smeared in an ordinary plastering way, with a thickness of about 10 mm each time, and the ground is smeared on both sides and the wall is smeared once.

4.The construction is 20 hours and the water is sprinkled and maintained, and the direct sunlight needs to be covered!

The best material to do waterproofing in the kitchen is JS waterproof coating, as well as polyurethane waterproof coating, but my personal opinion is still to use the former, because the smell of polyurethane is really choking, use waterproof paint to do more times, do higher, soak in water for a few days, observe whether there is less water, if there is, it means that there is a leakage, redo.

Clean up the slag inside, wash it with water, dry the water inside, and then brush the waterproof glue twice when it is dry.

Is there a floor drain in the kitchen? If there is no floor drain, there is no need to do waterproofing.

If there is a floor drain, the practice is the same as that of the bathroom.

Waterproof is not just brushing.