-
Anonymous users2024-01-24Sitting on the toilet, your ass is cold!
-
Anonymous users2024-01-23Winter is like this, and it takes courage to even take a bath.
According to the building acceptance standards, the heating pipeline should be supplied from the top to the bottom. Face the right side of the pipeline for supply, left side back. When heating, the high temperature is the water supply, and the low is the return water.
The toilet is not heated, which is a problem that the developer has not installed, and has little to do with the property. You can only analyze the specific problem when you talk about it, is it that the house was not installed when it was built? Do you have any reserved tubing? Or was the radiator removed? Or wait ...
You can touch this and wipe it. There are two ways to judge this. First, the hot pipe is the inlet pipe, and the cold pipe is the return pipe. Two. Generally, the highest is the inlet pipe. The lower one is the return pipe.
The pressure can be tested, and the pressure test is the pipeline. After the radiator is installed in the pipeline, there will be a pressure gauge to start the pressure test, until the final decoration is removed, the purpose is to detect whether there is damage to the pipeline during the installation, to see if the pipeline is damaged, if you do not agree, it is best to inject water into the system first, check whether there is any dripping.
It is possible that the valve is broken. Either the body, or the spool, or the seat. Always check them for corrosion or wear. >>>More