How to remove the door lock of the Guli bathroom if it is broken

This door lock is not easy to break, but the spring tongue is retracted and stuck, and you can return to normal by poking it with a screwdriver.

1. First unplug and turn off the power. Do cracks.

2. Secondly, unplug the rectifier and remove the spring. >>>More

You will observe the spherical lock, the front of the keyhole is outside the door, the other end is the door, the end of the door near the back cover where there is a small hole, there is a protrusion inside, you take a small screwdriver to push the protrusion inward, and at the same time the spherical object back back, you can remove the back ball, and then reverse twist the back cover, and remove it, and then you take a Phillips screwdriver to unscrew the round spacer, so that you will just open the spherical trivial disassembly! Now you can start to install the lock: you put the tongue of the lock (that is, the cylindrical object on the top of the box on it, and there is a square iron sheet with two holes on the top of it) into the hole on the side of the door, and then take the ball in front of it in your hand, and put the other end in the hole outside the door and stuff it into the room, and at the same time make the gap in the lock body align with the fork behind the lock tongue, and then buckle the round gasket after stuffing it into place, and tighten the screws, then screw the back cover, and finally, align the back ball with the lock and push it on. When pushing up, you should also turn it slightly clockwise, and remember that there is also a small gap in the back ball, and you should aim it in the direction of the small hole with a protrusion! >>>More

1. Preparations:

First of all, you need to prepare the tools that need to be used in the replacement process, such as: screwdriver, lock body, lock cylinder, etc. >>>More

Remove it and replace it with a new one, if you can't, you have to ask a professional master to repair it.