-
Anonymous users2024-01-24There is a reverse bend in the toilet, if it is stuck in the first half of the back bend, it may be hooked out with a small wire, and if it goes to the back, it is estimated that the toilet will have to be dismantled.
-
Anonymous users2024-01-231. Toilet flush valve installation The toilet bowl is broken, the button can't pop up, or the water keeps flowing into the toilet, or the water leaks, the toilet flush valve is broken. At this time, it is necessary to change the flush valve for the toilet, first of all, you should accurately measure the height of the inner wall of the toilet tank, the diameter of the drainage hole, and the diameter of the water inlet hole to determine the appropriate size of the toilet flush valve. Before installation, the top part of the drain kit should be removed to facilitate installation.
When the screws on the bottom half of the drain kit are exposed, loosen the screws with a taper. Remember to screw it loosely. The bottom piece of iron (this piece of iron is a bit curved and curved) should be placed on the outside of the tank.
Radian iron sheet, put on the outside of the water tank, at the bottom. The bottom of the water valve is aligned and concentric with the drain hole. Make the iron piece at a suitable angle and tighten the screws.
Return to the direction of disassembling the upper and lower parts, and install the upper part of the sleeve.
2. Install the water tank inlet kit.
If the toilet is broken, the button won't pop up, or the water keeps flowing into the toilet, or the water is leaking, the toilet flush valve is broken. At this time, it is necessary to change the flush valve for the toilet, first of all, you should accurately measure the height of the inner wall of the toilet tank, the diameter of the drainage hole, and the diameter of the water inlet hole to determine the appropriate size of the toilet flush valve. Before installation, the top part of the drain kit should be removed to facilitate installation.
When the screws on the bottom half of the drain kit are exposed, loosen the screws with a taper. Remember to screw it loosely. The bottom piece of iron (this piece of iron is a bit curved and curved) should be placed on the outside of the tank.
Radian iron sheet, put on the outside of the water tank, at the bottom. The bottom of the water valve is aligned and concentric with the drain hole. Make the iron piece at a suitable angle and tighten the screws.
Return to the direction of disassembling the upper and lower parts, and install the upper part of the sleeve.
The toilet has a stuck fish head, so you can use the guy who unclogs the pipe to get it!
1. Directly use the pipe dredging machine to dredge the toilet, sometimes you can bring out the hard object, this method also requires luck, depending on the specific structure of the hard object. The success rate is not very high. Generally, if the comb or brush causes the toilet to be blocked, the hard object can be brought out by direct dredging. >>>More
What to do if you have a toilet plug in the toilet, here are some suggestions for your reference. First of all, you need to confirm whether the blocked thing is a hard object or just a soft object: 1, if it is a hard object, and the caliber of the toilet has no way to pass through, then you can only find someone to pull it out; 2. >>>More
Toilet stuck stuff solved:
Take a few buckets of water and rinse vigorously from it; >>>More
Find a way to get through the water or make a thin wire yourself to penetrate It is recommended to find a professional to get it or you will die of trouble.