-
Anonymous users2024-01-24A: Just remove the glue around it and then move the toilet.
-
Anonymous users2024-01-23Use a flat chop, which is the kind commonly used by mechanics, to find a position in the seam from the front of the toilet, and hit the chop with a hammer to pry it up. If it's a new one, you can also ask them to replace it for you when you can buy a new toilet.
-
Anonymous users2024-01-221.The blackened glass glue should be shoveled off, be careful not to get the tiles, be careful, in fact, the glass glue is still very good to shovel.
2.Buy a tube of white sewing agent, choose the waterproof and mildew-proof kind, which is also sold in the store.
3.After scraping off the original glass glue, make a circle with a white sewing agent, or use it.
-
Anonymous users2024-01-21Use a utility knife to extend the edge of the toilet bowl to cut off the outer glue first, and then slowly cut it along the bottom edge of the toilet. The utility knife is very sharp, be careful not to hurt your hands.
-
Anonymous users2024-01-20The bottom of the toilet bowl is played, glass glue, you can use a wallpaper knife, along the gap, the glue can be cut, the toilet can be moved, really to help you look forward to adoption,
-
Anonymous users2024-01-19Cut the glue with a knife. I move.
The following is for reference.
The bottom of the toilet is leaking, it is recommended to use anti-mildew glass glue, the silicone glue with anti-mildew effect is longer than the general glue, more firm, not easy to fall off, especially suitable for some humid, mildew prone to the environment, such as bathroom, kitchen, etc. >>>More
The trick to quickly unclog the toilet bowl is very practical.
Toilet for a family, is very important, need to be used several times a day, if there is water seepage, it will affect home life, so it needs to be repaired in time, so what to do with water seepage at the bottom of the toilet, and what are the skills of daily cleaning of the toilet, do you know about it. Now let's take a look. >>>More
There is a leak around the bottom of the toilet, first overhaul the following aspects: >>>More
There are two ways, one is to move the toilet and re-dock the interface below, the key is to make the sealant or pad carefully. The second is to squeeze the sealant directly on the bottom of the toilet bowl where the water is sprayed, not too much, just paste the seam, this method is simple and easy to operate.