The buffer bend energy dissipation bend of the toilet sewer pipe is too noisy, how to reduce elim

Updated on Toilets 2024-05-12
6 answers
  1. Anonymous users2024-01-23

    The general treatment method is to wrap a layer of yellow glass wool or black insulation cotton, and seal the sound insulation board around it.

    Now the ordinary noise prevention and control is mainly completed by low-density insulation cotton on the market, low-density and large particles, no stickiness can only be fixed with tape, adsorption and vibration damping, the reduction effect is very general, and there is little difference between package and non-package. It can't be fundamentally solved.

    If we want to go to the next level on this basis, we must start from the source of noise, a new generation of low-frequency damping sheet will solve this problem very well, the vibration of the pipe wall is the main reason, the damping sheet + sound insulation cotton used together, it will greatly reduce the vibration of the pipe wall, thereby reducing the generation of noise, to achieve the maximum sound insulation effect.

    Low-frequency damping sheet: It has strong viscosity and tensile properties, strong vibration and shock absorption performance to prevent the vibration of the object, stop the generation of noise from the source, and isolate the conduction of the object to the sound. In particular, it has a good absorption effect on low frequency and vibration noise.

    Rubber and plastic soundproof cotton: It is a mixed foam material of nitrile rubber and polyvinyl chloride, because it is a closed-cell foam body, the sound from the pipe is repeatedly reflected and absorbed by the foam body in the middle in the closed space, so as to absorb high-frequency noise.

  2. Anonymous users2024-01-22

    Bathroom soundproof door or affixed soundproof strip This is the design problem of the real estate developer, this kind of pipe should not be installed in this way, it is a unified large pipe installed outside, the indoor is a set of elbows, each floor of each set of residents to take out, they are connected, there are bricks outside, down the drain.

  3. Anonymous users2024-01-21

    Personally, I think that you can only reduce this, eliminate this sound, but not stop it, you can get a water pipe package, so that it is beneficial to eliminate the sound.

  4. Anonymous users2024-01-20

    There is something called soundproof cotton, you can try it.

  5. Anonymous users2024-01-19

    This one is not easy to deal with because you are on the lower floor and there are more people upstairs!

  6. Anonymous users2024-01-18

    You can choose to make a soundproof package to deal with it, and we are using this kind of pipe here.

Related questions
3 answers2024-05-12

You can unscrew the screw cap at the bottom of the sewer pipe bend, and the sediment in the sewer pipe will be released, and then you can screw the screw cap on.

1 answers2024-05-12

If the squatting pit does not have its own trap, it must be equipped with a P-type trap; The old-fashioned toilet without an S trap should be equipped with an S-shaped trap. Today's toilets come with a sink and a water trap. The water storage is closed to block odors. >>>More

1 answers2024-05-12

It can be used by going through a back-water bend, but this is more difficult to get through. You should have one piece of pipe on one side of the hose on the back bend so that it is higher than the height of the other side of the horizontal pipe. Then wrap the hose and sewer nozzle tightly around the interface with waterproof tape.

3 answers2024-05-12

Summary. Hello, dear, no, the toilet sewer pipe has a trap, and it is not possible to install a siphon toilet, which will lead to a decrease in flushing efficiency. >>>More

1 answers2024-05-12

Sitting on the toilet comes with a trap, so the drain pipe does not need to be installed with a trap, as for your toilet outlet eye has small flying insects, it is recommended that you go to the supermarket to buy insecticide spray, please adopt it.