-
Anonymous users2024-01-24Construction specifications for flat sealed balconies.
Regardless of whether plastic steel windows or aluminum alloy windows are used, the size of the closed surface of the balcony should be accurately measured before sealing the balcony, and the window frames and fans should be processed and made according to the size outside the construction site before being transported to the construction site. Before installation, check whether the size of the window is consistent with the size of the opening of the sealed balcony. Before installation, the base layer of the balcony opening should be cleaned, and the base material of the window close to the wall should be removed, and holes should be punched at the fixed point, and expansion bolts or plastic expansion pins should be preset to fix the window.
When installing the window, the window should first sit firmly at the opening, and fix its position with a wooden mold, put the fixed steel plate on the window on the expansion bolt with the installation eye, fasten it with a nut, and after all the fixed steel sheets are installed, smooth out both sides of the hole with cement mortar, and bury all the fixed steel sheets in the cement mortar. After the cement mortar is dry and hard, the surface layer can be decorated, and the grout on the window frame should be wiped in time to prevent pollution of the window frame.
Construction specifications for convex balconies.
The convex sealing balcony should be made as a window sill first, drill through holes on the balcony wall, and insert steel bars, and the length of the steel bars is the same as the width of the window sill. Then bundle the transverse rebar on the outgoing reinforcing bar, connect the wall rebar spacing 300 mm, and the transverse rebar spacing depends on the width of the window sill, generally 200 mm, use two. 30 mm below the reinforcing bar, nail the box slab, pour concrete mortar, and embed wooden bricks or expansion bolts in the concrete.
After the concrete is dry and hard, remove the box board and clean the window sill. If the top of the balcony is made of reinforced concrete, the construction method is the same as that of the window sill, but the vertical steel bar cannot penetrate the eye, and the top of the balcony can be inserted 100 mm. The installation method of convex sealing balcony windows is the same as that of flat sealing balconies.
-
Anonymous users2024-01-23I didn't understand your question, can you make it clearer?
-
Anonymous users2024-01-22Can't the balcony be arranged on the balcony?
There is no code that clearly stipulates that there can be no toilet above the restaurant, and the restaurant is a toilet above it, and it is very troublesome whether it leaks.
There are provisions in the General Principles for the Design of Civil Buildings and in various professional architectural design codes.
First, the balcony should not face too much majestic building >>>More
The feng shui pattern and layout in the home are related to wealth and the prosperity of the family, in this regard, the master analysis of the soul divination hand believes that it needs to be paid attention to, and the master of the soul divination hand analysis of the living room needs to do this at the level of feng shui at home >>>More
Let's plant bamboo, Luohan bamboo is on the line, the water is shallow, it will grow very tall, and the balcony will be beautiful in the future. If there is no sunlight on the balcony, be careful not to get too cold in winter, as the plants will freeze if it is too cold in winter. I suggest planting bamboo, it doesn't need much sunlight to grow green, and it grows tall enough to reach the ceiling, and it will be beautiful in the future, so use the water tank as an oversized vase.