-
Anonymous users2024-01-23Power-on protection is mainly caused by abnormal voltage.
1: The smart toilet itself has a switch protection circuit, and the abnormal voltage will be automatically protected.
2: Check the lower socket first. Is there an abnormality?
3: Replace the socket for inspection, and send it for repair if it doesn't work.
If it had been changed before, it would have been troublesome, but now it can be easily solved. Now there is a CPC waterproofing agent on the market, which can effectively do your waterproofing problem, without moving the toilet, without prying the floor or toilet, directly coating. >>>More
Ten hail with disadvantages and ten thousand sell the knowledge of the cold source family.
The toilet tank is full of water because the water level is set too high. You can open the lid of the water tank and there is a cross-shaped notch at the top of the float valve, you can turn this notch to the left with a screwdriver to lower the water level, please adopt it.
1. The main excretion pipe below your floor is blocked. And the main drain pipe above your floor is still unblocked. According to the principle of the communicator, the fluid composed of excrement and water upstairs will flow out of your toilet. >>>More
The water float valve is abnormal, it is recommended to check it, sometimes the float will be stuck and move a little bit, it may be that the water pipe is dirty and discharged, or it may be that the drain is leaking, check it more.