-
Anonymous users2024-01-24If it doesn't freeze, it may not be hot or the circulation is not smooth.
-
Anonymous users2024-01-23Probably not, the heating will not be so frost-resistant, it should be that your heating itself is not hot, you can refer to what I once saw in the Boson radiator or the Boson radiator to explain this.
The radiator is hot above and not hot belowThe solution: remove the radiator, connect the two leather pipes to the window, open the inlet valve, flush the inlet pipeline, if the pressure is sufficient (the amount of water is large), it means that there is no problem with the inlet pipeline, then close the gold water valve; If the pressure is insufficient, find out if there is a blockage inside the upstream pipeline;
The radiator is hot above and not hot below: if necessary, open the skylight of the upstream pipeline to check, generally there will be waste plastics, insulation foam materials, etc., and remove them;
The radiator is hot above and not hot below: rinse the dirt accumulated in the removed radiator;
The radiator is hot above and not hot below: open the downstream valve and carry out backflushing, the method is the same as above;
The radiator is hot above and not hot below: connect the radiator, if the temperature difference returns to normal, the heating is not hot The problem is solved;
The solution to the problem that the radiator is hot above and not hot below: the serious water loss of the system is also a major reason why the heating is not hot, and the heat loss and economic loss are quite amazing;
The radiator is hot above and not hot below: if it is not solved, check whether the valve of the riser is opened correctly.
The radiator is hot above and not hot below: if the whole building is not hot, check that the pressure difference between the water supply and return should be greater than; Otherwise, it is caused by the hydraulic imbalance of the heat network, and the heat network should be adjusted, or a small circulating water pump should be installed at an appropriate position to solve the problem.
Hello, it may be that the pipes have been rusting for a long time and the water flow is not smooth, which should be this problem.
You can vent the radiator in the kitchen, which may be caused by the lack of gas in the radiator and poor circulation.
1. The valve is not opened.
If you encounter a radiator situation at home, you should first check whether the radiator valve is open. The radiator valve is generally a spherical valve, the valve has generally been adjusted before leaving the factory, generally only two directions, the handle is open when it follows the pipe, and the rotation is 90 degrees to close. >>>More
It should be caused by a blockage in the pipe, it is recommended to find a property or heating department to overhaul it!
There are many reasons why the radiator is not hot, such as your installation location, the size of the radiator, the water problem of the boiler, whether the radiator pipeline is blocked, the water pressure problem, whether the pipeline is relatively small, resulting in a small water flow, etc., it is recommended that you find an installation company to see, the system is made by them, it should be able to be solved.