What should I do if the toilet hole distance is not right, I bought the toilet of Wanjuan Sanitary W

Hello, I am Xiao Xiong, the technical director of Wanjuan sanitary ware, and in view of your question, I propose the following solutions:

1. You can buy a toilet shifter, the toilet shifter is a Z-shaped plastic pipe that can adjust the distance, but there will be a friend named dcjohn who said, if it is not installed properly, it will have an impact on the flush.

WJA-6197 WJA-6305

3. There is another way to expand the pipeline to the periphery, use a chisel to chisel off the address and cement around the pipeline, make it deeper, and then waterproof the chiseled parts, so that it does not affect the flushing, but if the waterproof seal is not treated well, there will be leakage.

Our company recommends that you replace the toilet bowl, so that it will not affect long-term use, and hope that the solution we provide can solve your problem.

The difference is not very big, so it is plugged with glass glue. There's really no way to use a pit pitch shifter.

The mainstream toilet on the market is 305 and 400 meters from the wall hole, so experienced plumbers will add 20 mm, or 325 or 420 holes, in addition to the thickness of the plastering and tiling. But if there is a problem with the construction, it will lead to the wrong distance, if the above two holes are not compliant, the toilet of individual manufacturers still has 500 hole spacing, pick one yourself, find a suitable one, it is really not suitable and can only be changed, it is very troublesome.

To measure accurately, the pit distance is the distance from the center point of the sewage pipe to the wall (wall with wall tiles), which is more than 300 and 400. But Wrigley bathroom AB1218 has a pit distance Yes, if it is below 20, you have to use a shifter.

You knock out the floor tiles a little, the flange ring under the toilet is padded, and the toilet bowl is sealed with silicone around it.

It doesn't matter if it's 4 centimeters, just press it. The perimeter is well established with glass glue.

There is a flange-like conversion head, which can increase the pit distance;

The disadvantage is that the blowdown may be affected.

I can't put the toilet hole I bought at the wrong distance, so I'll teach you a trick today, and it's easy to get it.

Wow, the after-sales service of Wanjuan has come to answer, the service is really good!