-
Anonymous users2024-01-241: First of all, check whether the leakage is a waterproof problem or a problem with the inlet pipe and drain pipe being damaged.
2: If the waterproof is not good, you can remove the toilet and brush on the surface of the tile without smashing the bricks for waterproofing, but the effect may not be completely solved.
-
Anonymous users2024-01-23It is said that there is a kind of waterproof coating that does not smash bricks, and you can ask a physical store that specializes in waterproofing to see if it can provide waterproof services.
It is recommended that you find a professional wolf warrior waterproof master to help you repair it! There will be no water leakage in the future! Hope it helps!
The water pipes had to be replaced, and the floor tiles had to be knocked out. There is no waterproofing material that can not knock on the floor tiles. >>>More
According to your pictures and the same thing you said, there is nothing wrong with the big bathroom, which indicates that the ventilation of your bathroom is very bad, the humidity in this bathroom is too large, and all kinds of hardware will be corroded in such a warm and humid environment. The solution is to install ventilation equipment, and ventilate frequently to maintain normal dry humidity here. Then replace the corroded hardware with new ones.
After removing the floating ash debris; The construction quality of the screed layer is not good, the ash is exposed, and the crack of the waterproof layer is exposed, if the crack is wide, the width and depth of the crack are not less than 10mm of the trench, and the floor and the wall interface part of the leakage. Generally, the surface layer is removed locally along the cracks, causing sanding, crisp looseness, string leakage, etc., the thickness of the coating film and the waterproof layer is not enough, the coating film construction process is unreasonable, causing shrinkage cracking, etc., and there is multi-point leakage on the floor due to the poor construction quality of the leveling layer, and the original waterproof layer is not firmly bonded.
First check whether the leakage is serious, if it is serious, it is recommended to knock on the bricks, if it is not serious, the water does not leak in the place of water seepage to pour down, first clean the seam and then fill, the general leakage is, the floor drain edge, or the toilet is easy to accumulate water for a long time, no matter how good the waterproof is not soaked, this is the slope of the bathroom is not done, first use the water without leakage around and the leaking place, after filling it for a day and then use, if the leakage proves that the situation is serious, hurry up and knock on the bricks, after all, it is convenient to dismantle it now just installed,