-
Anonymous users2024-01-24Close the main valve, the pressure can not be hit, the leakage point is large, the water outlet is slow, and the water outlet point is far from the leakage point.
1.It depends on what the place is, there is no fixed number. >>>More
It's troublesome, if it's infiltrated upstairs, you have to find an investigation, the project is a bit big, if you don't find out, do waterproofing, and the problem will be bigger in the future. Our family tried it once, but the upstairs did not cooperate, so we could only find the master to check slowly, and finally open a small hole in the leakage and install a small tube to lead the water out!
If there is a leak around the water pipe and prefabricated slab, a 2 x 3 cm groove needs to be cut around the pipe mouth. Then wash it with a brush dipped in water, and finally fill it with CF-2000 high-efficiency composite waterproofing agent, and smooth it with calendering. If the pipe elbow interface is leaking, it is necessary to customize special plugging fixtures and supporting plugging materials. >>>More
According to the current relevant regulations, the property is not responsible unless the tap water pressure of the secondary water supply is seriously high. >>>More
I am from Jinyang Pipeline, and if I find a leak, I should repair it immediately, and the leakage is not a small problem!