The bathroom at home has been trendy, what is the problem, how to solve it

Updated on Bathroom 2024-05-17
4 answers
  1. Anonymous users2024-01-24

    Put two cardboard boxes at the door, one on top of the carpet and one under the carpet (if there is a carpet, put it like this, if not, it will be directly on the ground), the weather is already very damp, and it is conducive to moisture absorption when entering and exiting. Also, keep it ventilated.

  2. Anonymous users2024-01-23

    Don't put anything on the floor, drain smoothly, mop dry if you can't drain it, keep it ventilated, and turn on the exhaust fan if you can't ventilate.

  3. Anonymous users2024-01-22

    If the waterproofing is not done, the walls and floors should be redone, and the waterproofing should be pasted with tiles.

  4. Anonymous users2024-01-21

    It's a dark guard, but the moisture prevention is not done.

Related questions
5 answers2024-05-17

Flush, and then put a bottle of air freshener in the bathroom.

1 answers2024-05-17

If the upstairs bathroom leak is not repaired, you can go upstairs to find a neighbor who lives upstairs and let him deal with it. But if you agree and then you won't repair it, you can directly find the community property and ask them to give advice or directly let them solve the problem. Toilet leak repair facilities. 2

4 answers2024-05-17

To find out how it came about, there is a water seal in the sewer hole, which is easy to dry on hot days, and the worms crawl out. Therefore, it is often necessary to add water to the water seal, or seal something under the water seal cap, and then remove it when you use it.

2 answers2024-05-17

This is a typical lamp bead quality problem.

You can use the diode or 200 DC resistance of the digital multimeter to test the luminous ability of the lamp beads one by one, and you can make a judgment on individual bad lamp beads. It can be replaced with lamp beads of the same specification, or it can be replaced with a better quality lamp board as a whole. >>>More

1 answers2024-05-17

In fact, the separation of dry and wet is to separate the washbasin, toilet and shower area of the bathroom, the dry area generally refers to the washbasin and the toilet, and the wet area generally refers to the shower area. Broadly speaking, modern bathrooms are basically separated from wet and dry, because the shower area is basically a glass shower partition or an independent shower room. In the narrow sense, the separation of dry and wet means that the handwashing station is separated from the toilet separately and the handwashing station is set outside the bathroom door. >>>More