-
Anonymous users2024-01-23It depends on the pressure of the water in the pipe, and the size of your faucet.
-
Anonymous users2024-01-22The flow rate of the faucet must not be calculated uniformly, and the flow rate of different mouths and bridges is of course different.
Another element is the pressure of the water dragon macro without a head. The pressure is different, resulting in the speed of the outlet is different, and this difference is very important.
Generally, it is based on the flow rate of water, and then multiplied by the caliber of the faucet and then converted to the volume of the cylinder, so that you know how much cylinder water flows out in an hour.
In this way, how many cubic meters are obtained, that is, how many tons.
This is more difficult to take (it is best to find professional maintenance), do it yourself to use 250 movable wrenches, hydraulic pliers, 8-10 small opening wrenches, 8 sets of copper or pliers. First, use a wrench to remove the hose connected to the angle valve. Follow the water inlet hose to check the fixtures of this faucet and basin, if it is a large plastic screw or copper hexagonal screw mother can be removed with hydraulic pliers, if it is a small screw with iron plates, with 8 sets of copper or tongs can be removed!
Such a leak can be repaired if the handle of the faucet can be disassembled, and it is a broken rubber pad inside.
A tee can be installed at one outlet to direct the water in both directions, so that an electric water heater can be installed. I hope my answer can help you.
The quality of this faucet is not good, and the soapy water is not flushed, so it becomes like this.
There are two faucets in the bathroom at home, one has been normal, and the other is getting smaller and smaller. >>>More