Is there any difference between three layer parquet and multi layer parquet? That s better

The difference between three-layer parquet and multi-layer parquet is that it is a single layer, which is made of three different types of wood, and the surface is made of hard wood, and the middle layer and the bottom layer are made of soft wood, so that the elasticity of the three-layer parquet is enhanced, and the relative cost is reduced, and the multi-layer parquet is made of multi-layer plywood. In addition, the more layers of laminate flooring, the better, and the three-layer parquet is more environmentally friendly.

1.If you need to look at laminate flooring first, and you feel uncomfortable, you are not interested in the option. Generally, qualified products are divided into three grades:

First-class products and excellent products, appearance quality is an important criterion. The color of the solid wood floor should be smooth and free of obvious defects such as cracks, mold, wormholes, and the texture of the surface layer of the wood. The surrounding mortise groove should also be smooth.

2.Hardwood flooring is a natural decorative material, you can take about 10 layers of flooring from the box when you buy it and attach them to a flat floor by hand. At this point, you can check if the articulation connection fits the interface and if there is a difference in thickness between the two plates.

This is the accuracy of observation. Observe the cross-section of the floor to see if the texture is messy, and then check for cracks, dead knots, and other defects. In addition, hardwood flooring is a natural product, so there is obviously a color difference, so you don't need to be careful.

Generally, three layers are enough, and our home is a safe three-layer solid wood floor, and the foot feeling and color are very good.

The service is also quite in place, in general, the price is not bad, quite affordable.

The differences between three-layer and multi-layer parquet are as follows.

Multi-layer parquet is made of multi-layer boards arranged vertically and horizontally as the base material, and high-quality precious wood is selected as the panel, which is made by high temperature and high pressure in the hot press after being coated with resin glue, which is easier to process.

The substrate of the three-layer solid wood floor obviously needs more processing, because its core board is composed of countless small wooden strips adjacent to each other, and there is a proper gap between each wooden strip, so that the wood can be fully expanded and contracted without affecting the overall deformation, and the technology is immature and cannot be completed at all.

The surface plate of the floor plays a very important role in the multi-layer and three-layer solid wood, and the surface plate of the multi-layer solid wood floor is required to be thick, while many domestic floors are only thick.

THE THREE-LAYER SOLID WOOD SURFACE BOARD IS GENERALLY 3MM, 4MM, OR EVEN 6MM, AND CAN BE POLISHED AND REFURBISHED AGAIN AFTER A FEW YEARS OF USE, AND THE CORE BOARD WILL NOT BE EXPOSED.

Stability is relatively thinner, generally using rotary cutting process, after rotary cutting will destroy the structure of the wood itself, so this internal stress is also destroyed, so that the wood becomes a "dead thing" after naturally reducing the possibility of deformation.

The three-layer solid wood is sawn, which ensures the integrity of the wood, and makes the wood still a "living thing" after cutting, so that the natural properties will expand and shrink. However, the three-layer horizontal and vertical staggered structure restrains each other, so that the probability of deformation is greatly reduced, and the stability of the multi-layer solid wood after natural destruction of the structure is better.

Three-layer parquet is made from three different types of wood bonded together on the surface of practical hardwood.

Practical softwood for the middle and bottom layers.

The elasticity of solid wood has been added to reduce the cost relatively.

Multi-layer parquet is based on multiple layers of plywood.

The surface is lined with hardwood sheets.

It is laminated by aldehyde resin glue.