-
Anonymous users2024-01-23The red one of the three wires must be the live wire, that is, the power intake, and the other two green wires are the outgoing wires that control the bathroom and the corridor respectively. The four wire holes of the double-open switch you buy are actually two holes for each switch, one for the incoming wire and one for the outgoing wire. But you only have one live wire to do the incoming wire, the easiest way is to connect the red wire to the upper end of a control switch, and then connect the upper end of another control switch from this inlet hole and a short wire, that is to say, let the two switches be connected in parallel, and then connect the two green wires to the other end of the two switches.
For the sake of aesthetics, it is generally paved from the door to the inside, that is, the whole floor tile is placed at the door, and the half brick or cut floor tile is placed inside against the wall. >>>More
JGJ50-2001 Code for Barrier-free Design of Urban Roads and Buildings, the installation height of the button is 400-500mm
Hello! The height of the switch installation is meters.
When in doubt, please ask. >>>More
The toilet outlet button is a wearing part, and it is generally necessary to replace it with a new one after a few years of use, and the toilet bowl with a higher price will be used for a longer time, and the lower price will be replaced in 2-3 years. You can buy toilet sewer accessories at the decoration material store, but sometimes they are sold in sets, you can buy a set of sewer accessories, all replace them with new ones, and the price is not high, you can buy it for dozens of yuan. >>>More
Boil a whole pot of boiling water in a kettle at home.
Find a discarded mineral water bottle and pour laundry detergent into it, about a third of the way through the bottle. >>>More