-
Anonymous users2024-01-24Before construction, it is also necessary to treat the base layer of the wall to ensure that the wall is smooth and dry, and to do a good job of moisture-proof and fireproof treatment. Then nail the keel, and nail the wooden keel to the wall according to the actual large whole piece or fragment of the background wall; Then nail the veneer to the keel, and the nailing is required to be evenly nailed, and the veneer is required to be smooth and flat as a whole. Then the finish is glued and sealed.
Precautions for the installation of wooden panel background wall.
The finished wood background wall does not need to be designed and built, just buy it and install it, and the wood will install the wooden board on the wall, and the real wood texture is more ornamental than other materials. When installing a wooden panel background wall, it needs to be fixed firmly to prevent the floor from falling.
First of all, the wall also needs to be treated, including leveling, moisture-proof, fireproof, etc. Then pop up the partition according to the design drawing, and put the keel on the wall, and the keel spacing is determined according to the width of the floor; It is also possible to use large core boards and other plates on the wall as the bottom plate, and nail it on the wall; Finally, the floor is fixed to the keel or large core board.
-
Anonymous users2024-01-23The installation standard of solid wood background wall has to be decided by the carpenter. It takes a carpenter to install it properly.
I believe everyone is familiar with the bedside wall lamp, but there are very few people who really understand the bedside wall lamp. The bedside wall lamp is not only convenient for people to switch on and off the bedroom lamps, but also more convenient for people to read in bed, when arranging the bedside wall lamp, we must use lamps and lanterns with lamp shades, because only the lampshade of diffuse materials can create a romantic and warm lighting effect, can mobilize the whole bedroom atmosphere, how to arrange the bedside wall lamp? What do I need to pay attention to during the installation process? >>>More
Now the decoration is mainly solid wood flooring! Spread a layer of plastic foam underneath and directly on the floor! There will be no thumping sound when such a floor is gone! >>>More
Take care of hardwood floors.
1. The humidity in the room should not be too large, keep the floor dry and clean, and wipe it with a wrung out cotton mop for daily cleaning; In case of stubborn stains, wipe with a neutral cleaning solvent and then wipe with a wrung out cotton mop, and never use acid, alkaline solvent or organic solvents such as gasoline to scrub. >>>More
Most kitchens are more complicated because the kitchen is smaller, and there are more kitchen appliances, and cabinets take up a lot of space in the kitchen. Some families will also connect to a washing machine, and various electrical appliances have different requirements for drainage, so how to arrange them together reasonably, practically and beautifully requires a lot of brains. There are two main types of kitchen sewer pipe installation: lower drainage and side drainage. >>>More
1. The common loss of flooring is: 5% of laminate flooring; parquet 7-8%; 10% of hardwood flooring. However, if there is too much bending area or the color of the floor is not uniform, this loss will increase. >>>More