What to do if the home is decorated and the bathroom often leaks

Updated on Bathroom 2024-05-11
3 answers
  1. Anonymous users2024-01-23

    Bathroom leakage is the first thing to determine where the water leaks. Generally, there are three kinds of water leakage: 1. The leakage of the waterproof layer is manifested as serious water leakage downstairs after bathing or ground water, and the downstairs performance may be one or more places.

    The judgment method is very simple, plug the floor drain, and then release water on the ground, pay attention to the observation of the water leakage downstairs after 40 minutes, if the water leakage downstairs is serious, it is determined that the waterproof layer is leaking. In this case, you can find some waterproofing on the Internet, use waterproofing agent, caulking paste, and plastic steel mud to repair. That is, the surface of the bathroom is waterproofed again, without planing tiles, saving time and cost.

    2. The sewer pipe is leaking, which is manifested around the sewer pipe, and there is a serious dripping phenomenon. The way to judge is to drain the floor, the hand basin, fill the water, and repeatedly flush the toilet, and see the aggravation of the water leakage downstairs, it is the leakage of the sewer pipe. In this case, find a repairer to replace the sewer pipe and try to reduce the bricks as much as possible.

    Then it also needs to be waterproofed under the ground rework, and there is no need to plane all the bricks. 3. That is, the water inlet pipe leaks, if the water leakage is uniform and continuous, turn off the upper water, and the water will be reduced and will not leak. It means that the water pipe is broken.

    This situation can be solved by changing the open pipe, no need to plane the bricks, or judge the leakage point by suppression, and change the pipe is probably like this! Hope it helps! If you think my answer is good, you can give me a thumbs up! ~

  2. Anonymous users2024-01-22

    What to do if the bathroom is leaking.

    1. The waterproof layer of the bathroom is leaking.

    If there is a leak in the waterproof layer of the bathroom, it is relatively simple to deal with. At this time, there is no need to knock off the tiles, just simply use a penetrating waterproofing agent to waterproof the surface of the bathroom again. This allows the water to flow away from the waterway without flowing underground.

    2. Leakage of upper and lower water pipes.

    If the water pipe is underground, we also need to plane bricks to deal with it, but it does not mean that the entire bathroom has to be renovated. If there is a problem with the inlet pipe, we can change it to an open pipe, and the leaky pipe will be discarded. If there is a leak in the sewer pipe, the most important thing is to confirm the location of the leak first, and then depending on the situation, you can plane some bricks instead of all of them.

    3. The ceiling is waterproof.

    Bathrooms are humid in the home, and being surrounded by water vapor is a common occurrence. If there is a leak in the bathroom, you can consider using a PVC gusset with good waterproof performance. By enhancing the moisture resistance of the restroom ceiling, the water leakage of the entire restroom will be greatly improved.

    4. Leakage of underground water pipes.

    If the underground water pipe leaks, the ground bricks should be knocked open first, the joints of the water pipes should be found, and the sealing of the joints should be treated. If the problem is with the water pipe itself, the pipe must be replaced. After the replacement, it is necessary to re-bury the water pipes, and repair the waterproof layer and floor tiles within the repair area.

  3. Anonymous users2024-01-21

    The first step of the bathroom wall appears water seepage, should be water peeling, etc., generally caused by the leakage of the bathroom, find a professional plumber to check whether the pipe is ruptured and cause water leakage, etc., if it is a problem with the pipeline, you need to replace and repair the pipeline in time to solve the problem of water leakage, if the pipeline is no problem, then consider the waterproof layer is not done well caused by the leakage, if the local water leakage is serious, do the waterproof again so that the problem can be fundamentally solved.

Related questions
13 answers2024-05-11

Go to 58 to find the golden shield waterproof and ask.

6 answers2024-05-11

You can negotiate with the people upstairs or report the situation to the property to see if repairs are needed or for any other reason. >>>More

3 answers2024-05-11

Causes and solutions of toilet water leakage:

1. The waterproof layer is leaking. >>>More

3 answers2024-05-11

Bathroom leakage, most people's first reaction is that the waterproof is not done, but there is a link that is easy to be ignored, that is, the bathroom backfill material, now there are several backfill methods on the market, slag backfill, cinder backfill, ceramsite backfill, prefabricated board overhead. These backfill methods are relatively heavy, and excessive load will cause the main body to settle, crack, and lead to water leakage. Long-term humidity is also a breeding ground for bacteria, and it is also easy to collapse and easily become a parasitic place for cockroaches. >>>More

11 answers2024-05-11

First of all, you can go downstairs to the owner's house to check the water leakage, and then find the leakage point, and prescribe the right medicine according to the situation. If the water leakage is caused by a ruptured water pipe, you should first chisel the wall surface, then find the leaking pipe, replace it, and rebuild the waterproof layer. If the water leakage is caused by the failure to do a good job of waterproofing, the original waterproof layer should be removed first, and then the waterproof layer should be redone. >>>More