-
Anonymous users2024-01-24Your line is still connected wrong, give you a schematic, carefully study what is wrong?
The live wire zero should be connected to the main contact, otherwise it will produce one that does not open and the other cannot be controlled, one is open, the other switch is free, one is closed, and the other cannot control anything, right? See Fig
-
Anonymous users2024-01-23The socket wire is connected incorrectly. To change this: change the short wire between the red and green lines in Figure 1 to short between the red and yellow lines.
This kind of connection requires an experienced electrician, ordinary people do not move, the wrong wire will cause a short circuit and serious consequences. There are two power supplies in the three wires, one light cable, the power line is connected to the socket and the left and right contacts of the dual control, and the light wire is connected to the center head of the dual control. It is important to remember that the wiring must be carefully verified before wiring.
You are non-standard wiring, you can't see it. The line of fire enters the middle head, and the other two are connected to the other two heads.
If you borrow money with a small amount of money with five holes in the head of the bed, he should have a three-color wiring method.
Yes, the Foton switch can be changed to a double-open one or three holes (two-face cover).
It is necessary to connect two wires, and these two wires are one through and one is disconnected, because the dual control is in the form of breaking and opening. The live wire is connected to the switch at the door, and a wire is connected to the head of the bed to the light (switch control line).