You need to connect the living room top box to the bedroom router about 10 meters away, the wireles

You can try wireless bridging, put the secondary router in a suitable position, and then enter the background of the secondary router, find the wireless bridge or wireless renewal, then scan the surrounding wireless signal, find the wifi signal sent by the main router, and then select the wifi signal sent by the main router and enter the corresponding wifi password to save it. After that, the secondary router may restart, find the wifi signal sent by the secondary router (after the secondary router sets up the wireless bridge, the wifi signal name will change to the same as the wifi name issued by the main router, but some routers will also keep the same wifi name as the original) and enter the wifi password (the wifi password of the main router, if not, try the original wifi password of the secondary router), connect to the wifi signal of the secondary router to see if you can access the Internet, If you can't, you need to enter the background wireless bridging or wireless continuation related settings of the secondary router to see if the bridging is successful, and if so, check whether the secondary router DHCP is disabled. If the bridging fails, try again as before.

If the sub-router can access the Internet and the set-top box supports wifi connection, you can use wifi to connect, of course, you can also connect to the network interface of the set-top box from the LAN port of the sub-router through the network cable.

1. A router B set-top box, this is a wired way, according to the above problems should be the network cable or head problem in the wall, most of them are the joint (too long oxidation,) or the line sequence is wrong, the module used in the two sections of the wall is inconsistent, etc., transmission with: orange, green two pairs of lines, others can be ignored, focus on checking.

Second, the router is connected in series, see if the router branch does not support wireless bridging, the main router can not be moved, the secondary is changed to wireless bridging mode (if supported), you can't enter the router, please restore the factory settings (rest, there is generally a small hole near the network port, after powering on, press and hold it to move, see that the indicator light will be fully lit for a while, OK), and then log in by default.

Let's take a look at whether the indoor dark line is not open to eight cores, if there are four cores that are connected, then you can use these four cores to connect, which is the most convenient, and 100 megabit transmission can also be achieved.

You see if the network cable in the wall has not been tested, whether there is a problem with the signal, and if there is a problem, you have to change the cable.

Friend, I can solve this problem for you! Professional computer repair tells you! What brand is your set-top box???

Do you want a wired connection or wireless! You just need to tell me that kind of plan, and I'll tell you how to set it up and how to get it, make sure you're OK, and if you don't understand anything, you can ask me!