What to use to rub solid wood furniture

With a semi-dry rag, along the wood grain wipe is the most correct, because if the solid wood furniture is used dry wipe is easy to cause more or less scratches in the home surface, if you use too wet wipe, because the wood itself has a certain rationality, if you wipe it with a too wet rag for a long time, the solid wood furniture is easy to deform and crack. . . .

If you think it makes sense, remember to give it hehe.

--- Omega tile small emerald.

If it is ordinary solid wood furniture, use orange oil.

If it is solid wood furniture for the purpose of value preservation, use wood wax.

Because wiping wood wax is more tiring than rubbing orange oil.

Spray the glazing spray first. With a cleaning effect. Wipe it with a sponge and spray it with some waxing spray It is sold in the supermarket Personally, I think Johnson Bilizo This brand is good.

Do you make furniture or buy it for use?

If it is a consumer, the paint sprayed on good solid wood furniture is environmentally friendly and scratch-resistant, and the gloss is also very full.

The effect of wood wax oil in solid wood furniture is very good, mainly because wood wax oil has strong permeability, and the wax film is soft and delicate, smooth and feels good. Wood wax oil can protect the wood from mildew and rot from the inside, and the wax film on the surface has good waterproof and wear-resistant, so wood wax oil is more suitable for solid wood furniture.

If the polished or varnished wood is burned by matches and other heat, it leaves marks. You can rub it with half a lemon and then with a soft cloth soaked in hot water. Finally, quickly dry with a dry soft cloth, and the furniture will become particularly clean after wiping it clean.

Gently wipe off the surface dust with a soft cotton cloth every day, and wipe the dust from the corners of the furniture with a damp cotton cloth wrung out every other week (depending on the environment), and then dry it with a clean soft muslin cloth.

Maintenance skills of solid wood office furniture:

1.Solid wood office furniture wood raw materials need to be dried, wood has low moisture content, not easy to crack. However, solid wood is easy to absorb moisture in the air, and will expand or contract with changes in humidity, and it is normal to have a telescopic distance of 1 5 mm.

When placing the products in the exhibition hall, you should pay attention not to place the products in a humid or too dry place, such as near high humidity and high heat places such as air conditioning and heating, or too humid basements and other places to avoid mildew or dry cracking.

2.Avoid using gasoline and chemical solvents to remove paint stains. If there are stains on the surface of solid wood furniture, do not rub it vigorously, you can use warm tea and soapy water to wipe the stains off, wait until the water volatilizes and apply a little light wax to the original part, and then gently grind several times to form a protective film.

3.Solid wood office furniture can be kept bright for a long time, and the surface of solid wood furniture can be wiped with neutral soap and warm water (about 1:20).

Wring it out with soapy water soaked in solid wood and wiping it, and then using a dry cotton cloth to absorb the moisture on the tabletop can reduce the adhesion of stains on the surface of the furniture and maintain the beautiful color of the furniture.