The six meter by six meter living room does not use beams, and how to arrange the reinforcements

Updated on Living room 2024-05-29
5 answers
  1. Anonymous users2024-01-24

    The six-meter by six-meter living room does not use beams, and how to arrange the reinforcements

    The length of the beam is 6 meters, depending on the cross-sectional size of the beam you set, according to the cross-sectional size to carry out the configuration of the early reinforcement. Put the reinforcement according to the requirements of the design. The upper iron, the lower iron, stirrups, and other steel bars are put in one by one according to the design.

    The function of the beam pad is to evenly distribute the load transmitted from the beam on the wall below it to avoid crushing damage to the brick wall. If it is placed eccentricly with the beam, the effective bearing area of the brick wall under the hidden beam pad will become smaller, and the left and right forces of the wall under the beam pad are uneven, which has an adverse effect on the safety of the wall. Therefore, it is best to place it in the middle of the girder.

  2. Anonymous users2024-01-23

    The length of the beam is 6 meters, depending on the cross-sectional size of the beam you set, and the reinforcement will be configured according to the cross-sectional size. Put the reinforcement according to the requirements of the design. The upper iron, the lower iron, stirrups, and other steel bars are put in one by one according to the design.

    The function of the beam pad is to evenly distribute the load transmitted from the beam on the wall below it to avoid crushing damage to the brick wall. If it is placed eccentrically with the beam, the effective bearing area of the brick wall under the beam pad will become smaller, and the left and right forces of the wall under the beam pad are uneven, which has an adverse effect on the safety of the wall. So it's best to place it in the middle of the girders.

  3. Anonymous users2024-01-22

    First, a reasonable plate thickness is selected, and then the structure is calculated, and then a reasonable treatment is taken in the structure. It is recommended to use C25 for the concrete strength grade, 150mm for plate thickness, three-level steel bar with a diameter of 12mm, 150mm spacing, and a double-layer two-way configuration.

  4. Anonymous users2024-01-21

    6 reinforcements of 28 14 sleeve distribution spacing 20

  5. Anonymous users2024-01-20

    Double-layered bidirectional ribs.

Related questions
How to decorate the ceiling of the four-meter by-six-meter living room
1 answers2024-05-29

The ceiling is best double-layered, like the European or style, the middle is left empty, which can show the momentum, and the living room area is relatively large.

Is there only a row of dark beams in the living room of the brick and concrete structure of six mete
1 answers2024-05-29

There won't be just dark beams.

For a regular brick-concrete structure house, there must be other open beams on the plane area of 6 8, otherwise normal building construction cannot be realized. Unless prefabricated panels are used or the construction process is not standardized. >>>More

How to decorate a living room six meters long and six meters wide
1 answers2024-05-29

The living room is a place to entertain guests, the sofa is a common configuration, and the background of the living room sofa can be selected. >>>More

The living room of the long house is six meters long and four meters wide, and it takes fifty, and t
2 answers2024-05-29

A6 4 (.)

86 (block). >>>More

Six meters long and 6 meters wide living room decoration
1 answers2024-05-29

Six meters long and 6 meters wide living room decorationIs it a living room or a living room? If it is one, walk around the straight line ceiling, you can make a groove wallpaper or something according to the general decoration style to save money and pay off the effect. >>>More