-
Anonymous users2024-01-24I've encountered the same before, and experience has taught me: don't turn it on, don't blow it with a hair dryer, don't shake it, don't dismantle it, don't bask in the sun. Do not bake.
You can: wipe the surface dry, wrap it in a paper towel to absorb water, fill the headphone jack with a hole, suck out the water in the home button hole with a paper towel, put it in the rice, take it out and put it in a ventilated place after a few hours, let it stand for two or three days before trying to open it. If you don't have rice, just put it in a ventilated place.
If it's two or three days later, take it to the warranty.
-
Anonymous users2024-01-23Blow dry with a hair dryer on power.
I have been doing mobile phone repair for ten years, I have done it in customer service, and I have opened a store myself, in this case, if you have the tools to disassemble the machine, you can disassemble it yourself, use industrial alcohol, it is best not to use medical alcohol, the concentration of medical is not enough. Rinse the circuit board with alcohol, remove the MIC on the motherboard, rinse it with alcohol, or soak the motherboard in alcohol, rinse or soak it and then dry it with a hair dryer. However, if you have feelings for this phone and really want to repair it, it is recommended that you go to a repair shop, after all, you have not repaired it. >>>More
Be sure to take it out as soon as possible and immediately remove the electric board, SIM card, dry the water on it, immediately wipe the water on it with a dry cloth, and then use a hair dryer (ordinary temperature is OK,) to dry, do not put it in the sun to dry, let alone roast it with fire, a sun quasi-scrapped, and then put it in a cool place to dry (if possible, you can use a household electric fan to blow a morning), to ensure that your mobile phone can be turned on normally the next day, if your mobile phone is soaked in water for more than ten minutes, or after removing the SIM card of the electric board, Go to the professional and technical personnel, generally less than 5 minutes can be used this method to bring the dead back to life
I don't think this repairer is responsible, it is impossible to burn the motherboard under normal circumstances, the reason for the burnout is that the landlord's mobile phone fell into the toilet and the water caused the components to be short-circuited and burned, and the repair of this kind of mobile phone with water is not guaranteed to be repaired.
1.Get your phone out of the water as soon as possible. Water can seep into the phone in seconds through the headphone jack, charging port, USB port, or even the gap in the seemingly tight phone cover. >>>More
Do not try to turn on the machine, open the back cover as soon as possible, remove the battery and card, and then try to wipe all parts clean, put it in a ventilated place for at least a day or two, and wait until it is completely dry, or use a cold air dryer to blow it until it is dry >>>More