-
Anonymous users2024-01-24You can put on the water, and if the water flows to the toilet bowl after the water is on, you can open the lid of the toilet tank in the hidden hall, adjust the water level adjustment lever on the left (usually) until it is submerged and cannot flow to the toilet, and then cover the water tank cover stove bridge hidden.
-
Anonymous users2024-01-23You can fill the water, and if you want to run water to the toilet bowl after filling it, you can open the lid of the toilet tank, adjust the (usually) left water level adjustment lever until it cannot flow to the toilet, and then close the water tank lid.
Freshly installed toilets can be used to urinate. However, you need to pay attention to some when sitting down, avoid moving the toilet too hard, because the glass glue on the toilet bowl may not be dry, if there is shaking, the bond is not tight will lead to poor sealing, it is best to wait for 24 hours. < >>>More
The smart toilet seat is to be wired, and if you don't have a socket, it's best not to avoid forced use, and it is very dangerous to pull the temporary socket at that time, because the bathroom is damp.
Under normal circumstances, it takes 24 hours for the glue to dry and fix, and the general installation master will tell you to use it after 24 hours.
Of course. Moreover, it is necessary that all water in the home, need to have a valve, in order to avoid, the toilet or basin faucet, after the problem, can not close the valve in time. Generally, when decorating, it is like this, and the first indoor main valve is installed on the inlet water pipe. >>>More
Hello, the room in the public rental housing can be renovated and the toilet can be renovated, it belongs to the decoration upgrade, no problem, thank you!