-
Anonymous users2024-01-24Summary. Shunt.
The water pipe into the house is divided into three roads, one way to the kitchen, one way to the balcony, and one way to the bathroom.
The point is that the water heater (gas) is installed somewhere in the kitchen or between the kitchen and bathroom, but it must be used from the bathroom inlet pipe, and then the outlet pipe goes back to the bathroom.
In this way, it is perfectly solved. The downside is that it's a bit more expensive.
How to make a waterway so that the bathroom and kitchen can use water at the same time without affecting each other?
Shunt. When the letter enters the water pipe, it is divided into three roads, one to the kitchen, one to the balcony, and one to the bathroom. The point is that the water heater (gas) is installed somewhere in the kitchen or between the kitchen and bathroom, but it must be used from the bathroom inlet pipe, and then the outlet pipe cover and then back to the bathroom.
In this way, it is perfectly solved. The downside is that it's a bit more expensive.
What if there are multiple toilets (water heaters)?
Okay, please wait for me to help you with your inquiry.
If there are two toilets, it is recommended that you install them in the aisle with good ventilation outside, and it is strictly forbidden to install the in-line water heater in the bathroom, and the non-outdoor water heater is generally not suitable for outdoor installation. If you want to reduce the space before the loss, you must choose the ceiling installation, and install the water heater completely hidden or semi-hidden, so that the electric water heater is hidden in the ceiling and the whole room will not produce a sense of depression; The electric water heater that can be installed concealed must have a wire control and remote control, so that even if it is hung in a high place, it will not affect the user's operation.
-
Anonymous users2024-01-23It will have some impact.
It will be much better to use a thermostatic water heater with a thermostatic faucet.
There are three ways to do it:
1.with a water repellent agent. First use waterproofing agent mixed with cement mortar to do it at the base of the kitchen or bathroom, and after it is dry, then use waterproofing agent mixed with cement ash to brush a layer on the surface layer for the first time, so that the main purpose is to plug the small holes produced after the first drying, and the root of the pipe should be carefully brushed. >>>More
Bathroom, kitchen waterproof.
Due to the small area and many pipe outlets, it is not suitable to use membrane waterproofing, because the interface of membrane waterproof material is compared. >>>More
Before construction, it is necessary to ensure that the dry waterproof coating of the ground should be coated, without any omission and the base layer should be firmly combined, no cracks, no bubbles, no falling off The height of the painting is consistent, and the thickness should meet the requirements of the product regulations.
In many family bathrooms, the bathroom and toilet are separated. Generally speaking, the following points need to be paid attention to when partitioning: Precautions 1: >>>More
How do you make a bathroom waterproof? Let's find out.
Bathroom waterproofing needs to be painted with waterproof paint twice, the first waterproof coating needs to ensure that it is firmly combined with the base layer, and then brush the second time after the first paint is dry, and then carry out a closed water experiment after completing the brushing, and observe that there is no leakage before it is completed. >>>More