-
Anonymous users2024-01-23Gas water heaters are water-controlled and have a minimum water flow requirement, which is not met, and the water heater cannot release gas and turn on the ignition and cannot be used.
It is recommended to check the water output of the hot water faucet, if it is small, it may be a problem caused by insufficient water flow.
The cold water is normal, the hot water output is small, you should consider why the original hot water is large, and now the hot water is small, the reason is that the scale deposit is more original, the problem of blocking the pipeline, the water flow rate does not meet the conditions, and the water heater can not be ignited.
It is recommended to clean and descale immediately, you can buy a set of gas water heater without removing the scale device online, use it to inject descaling agent into the water heater to clean the inside of the water heater and the inside of the hot water pipeline, the operation is simple and convenient, and it can be cleaned regularly after use, when this problem can be avoided again.
Kitchen water too.
resulting in flow through the water heater. >>>More
Gas water heaters that can't catch fire can be divided into no ignition sound and no ignition and no ignition sound when there is a little fire. >>>More
This situation is obviously not a problem with the water heater, but is caused by the use of more hot water in the bathroom and the accumulation of dirt in the hot water pipe. >>>More
Multiple reasons. No gas.
Low water pressure. To change the battery. Wait a minute. >>>More
If the water output in the shower is small, it should be that the shower head is blocked, please unscrew the shower head to try, if it can be played, please replace or clean the shower head!