-
Anonymous users2024-01-24It is likely that the joints of the pipeline are not firmly connected, resulting in water leakage in the pipeline when water is used;
It is likely that the waterproofing at the threshold stone is not well made, resulting in water outflow;
It is recommended to remove the floor tiles and remake them, and the problem of waterproofing is not a trivial matter.
-
Anonymous users2024-01-23It should be a pipeline problem, maybe the pipeline interface is not done, this can be Taobao ask someone to get it.
Find the water seepage part and glue it at the brick joint, check whether the tile is hollow, and the hollow drum must be the water seepage. This area is treated intensively. Glue the junction between the wall and the floor. >>>More
It does not mean that there is no problem, it is recommended that you and the upstairs are looking for a professional decoration company.
If you say that there is water to wipe off will drip water is too interesting, I would recommend that you observe for a few more days, many times we are doing waterproofing, but when laying tiles, many workers do not pay attention to the waterproof layer, which is also a place that many owners do not understand, if there is no corresponding drain in the lowest position, then it should be waterproof broken, if there is a drain, then it may be a leak at the edge of the drain.
1. Check the pipes for water seepage. Mainly up and down the water in the part below the waterproof 2 most likely The water is the faucet should be 1 meter above the ground, and you are waterproof up to 1 foot like that, depending on whether your water pipe is empty behind the tiles, you use the water pipe, and he will flow down the water pipe to the waterproof. >>>More
Yes, the construction method of high-pressure grouting and leakage plugging is adopted, and the premise is that you have to communicate well with the owner downstairs. >>>More