Ask for expert answers! The construction process of bright white paint for furniture! How can you ac

Hello, first of all, white paint has high requirements for the flatness of furniture, you must first batch ash, a large amount of ash, and then fine grinding, if the conditions allow, it is recommended that you use putty ash, secondly, the quality of your spray gun is also critical, that is, the quality of the spray gun head, and then the viscosity of your paint, grasp it well, if it is thick, it will spray out the same result as orange peel, but even if you do these well, you can't spray the effect like a German cabinet, because, a very important reason is that your environment, Generally, high-end furniture factories have dust-free workshops, all of them are running water in a room, the ground, the walls, very strict, so that the white paint sprayed will be good, finally, this is still not good, then you need to bake paint, that is, the process of the piano, it is very not recommended that you learn by yourself, this thing needs to learn from others, especially the color mixing, the most technical content, I suggest you go to a furniture factory to do it for a period of time.

If the construction conditions are not met, the site is dusty, you don't have a dust-free paint room, and you don't have a water curtain paint booth, of course, the effect is discounted.

First of all, it is necessary to batch ash, water ash, pig blood ash, self-adjusting double fly powder and white latex are also OK, mainly to flatten the substrate, fill the wood conduit and potholes, and ensure that the adhesion does not fall off, but it is not recommended to use putty because the putty curing agent is a yellow gelatinous substance, and the yellow part of the putty will reveal the white topcoat after a long time. After the ash is dry, sanding and grinding once attached to the bottom or sealing the bottom, sanding after drying, doing white bottom, PU, PE are OK, ensuring that the substrate is covered, not once, do it again after sanding, otherwise it will lead to discoloration of the final white topcoat through the bottom, sanding after the primer is dry, sanding with 400 sandpaper, sanding paper sand with a hard plate, and then using 600 sand bottom to remove the sand marks, do white topcoat, pay attention to cover the substrate to ensure that the paint film is plump. Leave to dry.

It is required that the bottom oil and surface oil must be yellowing-resistant products. Otherwise, it will be yellow after a while, the proportion of paint varies from manufacturer to manufacturer, and there is a ratio on the packaging barrel, pay attention to the appropriate amount of curing agent, add less and it is not easy to dry, the hardness is not good, and it is easy to get prickly heat and blistering if you add more. The environment is very important, pay attention to ventilation, dust removal, temperature and humidity.

There are red, yellow, and blue, red is 7 8 meters longer than blue, yellow is 4 5 meters shorter than blue, and how many meters is the difference between red and yellow.

One thing you overlooked is the painted environment! The painting process and drying of high-gloss furniture are carried out in a dust-free workshop! And the air of their spray gun is filled with a stable air pressure through the storage pressure filler!