-
Anonymous users2024-01-23Your first router doesn't have switch functionality, and all WANs connected to the second one can't get a signal. You can directly set the second router to relay or bridge mode, and connect the wireless signal of the first router to the second router for wireless signal amplification. Just use its wifi.
-
Anonymous users2024-01-22Just buy a repeater, connect to the wireless and you can have a signal. You can't do this with 2 routes, and one repeater is only 50 yuan.
If someone else answers randomly, your main and secondary routes can't be used, this is a gateway, understand?
Your question 1 is correct, you must add a route to the weak current box. Then connect the network cables in the room at home to the rubber fiber on this road. >>>More
Hello, you can connect your computer directly to the router, so that you can go directly to the Internet without dialing, or you can connect to the broadband modem, which requires dial-up to access the Internet.
The second router is set up like this: first go in and change its IP, (for example, the IP of the first router is , then change the IP of this router, that is, the LAN port, to something else.) For example, the rest is to set its WAN port, the WAN port setting changes the IP to the subnet mask is the default, and the gateway is the IP DNS of the first router is also filled in. >>>More
Hello, if the network cable has been laid during the renovation, you only need to use the network cable to connect the computer and the broadband modem, and then dial up on the computer to access the Internet.