What should I do if the bricklayer accepts the slow water in the shower room

Updated on Shower room 2024-05-08
1 answers
  1. Anonymous users2024-01-23

    See if the sewer is blocked, there are generally three possibilities for the sewer to be blocked, first, the waterproof coating enters the sewer pipe when doing waterproofing, this situation is unscrewed from the bottom of the U-shaped pipe and poked upside down. Second, the construction waste falls into the method as two, and it can be cleaned up. If the three compounds are blocked, go to the material store and buy a bottle of solution of diluted compounds and pour it in.

    Hope it helps.

Related questions
3 answers2024-05-08

It can be dredged directly with a steel wire dredge of more than 3 meters, which is usually caused by too much hair.

1 answers2024-05-08

The wheels of each manufacturer are different, it can be said that there are hundreds or thousands, try to find the original manufacturer with one, otherwise you can only make do with it.

11 answers2024-05-08

Pour in half a bowl of baking soda twice as much white vinegar and react to clean the stains, then pour in hot water. Baking soda and toilet water and laundry detergent, stir well with warm water, and pour it into the drain to prevent odors and small flying insects. Perfect.

11 answers2024-05-08

It is the reason for the floor drain, and it is recommended to choose a floor drain with a better brand.

4 answers2024-05-08

For the installation of pulleys on the glass sliding door of the bathroom shower room, the wheels should be installed on the door first, then the wheels should be adjusted to the lowest position, then the door should be installed with the card slot, and finally the wheels should be raised to the appropriate position. >>>More