-
Anonymous users2024-01-24First hang the two screws in the two chutes under the cover, and then put the screws into the two holes respectively, and put your hand into it from the back to tighten the nut, if it is a rubber stud, first expand the rubber into the two small holes of the toilet, and then lift the toilet lid The root has two small covers on both sides of the root and take it away, put the screws in and align the small hole in the middle of the rubber expansion and tighten it with a screwdriver, Okay, can it be used?
-
Anonymous users2024-01-23Slip the screw through the hole in the toilet bowl and put the nut underneath and you're good to go.
-
Anonymous users2024-01-22Nowadays, the toilet does not need to be fixed, and it can be used directly by applying glass glue to the edge of the toilet bowl for 24 hours.
-
Anonymous users2024-01-21You can't understand it for a while, but you can just go to the neighbor's house and take a look, it's all the same.
-
Anonymous users2024-01-20I don't see anything, and I can't help.
The toilet seat won't be tight, and you should install it correctly. Only if you can fix the approximate position, you can do it.
Hello, if you can't reach behind the toilet, you can only remove the toilet, in fact, the toilet is easy to remove and easy to install, the toilet lid screws are generally not plastic, how can you rust. It is advisable to remove the toilet bowl and it will be done quickly.
Try it with an open-ended wrench or needle-nose pliers or a small movable wrench.
The frequency of use of the toilet seat is relatively high, and it will inevitably be damaged after a long time, but many friends change the toilet seat for the first time and have no experience, and the most headache is that they can't find a fixed place. From the outside, there are no screw holes at all, and the whole design is streamlined and thick. So how do you change the toilet seat without screws before the fight? >>>More