The chandelier in the living room flashes frequently, but as long as the socket is plugged into othe

Updated on Living room 2024-05-18
2 answers
  1. Anonymous users2024-01-24

    If the inner wire of the switch is loose or the switch is in poor contact, disassemble and tighten the wire or replace the switch.

  2. Anonymous users2024-01-23

    First make sure that the chandelier is fine, then it is a problem with the socket or the use of other electrical appliances that affect the stability of the current! Flashing is because the current is unstable, high and low, when using the chandelier, there is no other electrical appliances that affect the current at home, that is, the socket and the chandelier switch wiring contact is not good! It is recommended to check whether the contact between the electrical appliances is good and whether the water leakage is too loose, and whether the contact between the socket and the power cord plug is too loose!

    Just add a voltage regulator if it's no problem!

Related questions
Hello everyone, the chandelier in the living room, there are seven lights, turn on the switch and tu
1 answers2024-05-18

Buy a sectional switch and connect it to the chandelier. (Some sectional switches also have remote control). >>>More

The living room light turns on the switch and does not light up, and sometimes it turns on itself wh
2 answers2024-05-18

The landlord has solved it.,I'm also experiencing the same problem.,How to solve it??

The bedroom LED is often not lit, the living room turns on the switch, and the living room light is
3 answers2024-05-18

The room light and the living room light are connected in series circuit, and another wire can be connected to the living room light before the switch entrance line of the room light.

After the ceiling light in my living room is turned on, the warm light is very dim and dim, as if it
2 answers2024-05-18

If the warm white light is only as bright as a star, or if there is a warm light that is not bright, it is recommended to change the light source and driver.

The third-level decorative light in the living room is broken, turn on the switch, the light is not
2 answers2024-05-18

This is a wiring problem, the main control board of the three-gear lamp in the living room can be replaced, some things do not want to repair especially this three-gear lamp, if the main control board is replaced is not good, see if the controller of the distribution box lighting is not in poor contact. And the most critical thing is that this kind of three-gear light If it is an LED, you have to see if the LED connector is loose during installation, remove the lamp to see, it is recommended to find an electrician to take a look at it, electricity This kind of thing is not professional or less touched, if it is an old house, the wiring problem is very likely.